![](/images/new-backgrounds/1295750/29575027x1.webp)
Controls and Their Functions
Shooting (Recording)/Playback Function Section (1)
Viewfinder
PEAKING control
This is used to adjust the contours of the images inside the viewfinder to facilitate focusing. It does not affect the camera’s output signals.
CONTRAST control
This is used to adjust the contrast of the screen inside the viewfinder. It does not affect the camera’s output signals.
BRIGHT control
This is used to adjust the brightness of the screen inside the viewfinder. It does not affect the camera’s output signals.
ZEBRA (zebra pattern) switch
This displays the zebra pattern inside the viewfinder. ON: The zebra pattern is displayed.
OFF: The zebra pattern is not displayed.
When the unit is shipped from the factory, the zebra pattern is set in such a way that those parts with an IRE video level from approx. 70% to 85% are displayed. The displaying of parts with a level ranging from 50% to 110% or more or with a certain level can also be set on the setting menu.
Diopter control knob
This is adjusted in such a way that the images on the viewfinder screen are seen most clearly in accordance with the dioptric power of the camera’s operator.
Eye cup
Viewfinder
Loosen this lever to adjust the position of the viewfinder | in the | |
direction. |
|
|
Eyecup |
| |
Turn this ring to adjust the position of the eyecup in the | ||
Viewfinder stopper screw | from the camera, loosen this screw and then detach the view- | |
To detach the viewfinder | ||
finder. |
|
|
- 1 4 -