Panasonic AJ-D700P operating instructions VTR Section, Accessories

Specifications

VTR Section

VTR Video System (during playback on a standard playback unit)

Bands:		Brightness; 30 Hz to 5.75 MHz +1.0 dB/–3.0 dB
S/N	ratio:	55 dB
K factor (2T pulse):		Within 2%
Y/C	delay:	Within 20 ns

VTR Audio System (during playback on a standard playback unit)

Sampling frequency:	48 kHz (synchronized to video)
Quantization:	16-bits/sample
Frequency response:	20 Hz to 20 kHz±1.0 dB (at reference level)
Dynamic range:	85 dB or more (at 1 kHz, AWTD)
Distortion:	Within 0.1% (at 1 kHz, operating level)
Wow/flutter:	Below	measurable	limit
Head room:	20 dB
Emphasis:	Ti = 50	, T2 = 15	(can be turned ON/OFF)

VTR Tape Running System

Tape speed:	33.820 mm/s
Recording/playback time:	Approx. 63 min. (using the AJ-P63MP)
FF/REW time:	Approx. 3 min. (using the AJ-P63MP)
Connectors
Input
AUDIO IN CH1/CH2	MIC/LINE switchable
(XLR, 3-pin, female):
	MIC; Menu setting to –60/–50/–40 dBu
MIC IN (XLR, 3-pin, female):	LINE; Menu setting to –6/0/+4 dBu
	Menu setting to –60/–50/–40 dBu, balanced 3 kohm
GENLOCK IN (BNC):	1.0 Vp-p, 75 ohm
TIME CODE IN (12-pin):	0.5 to 18 Vp-p
output
CAMERA OUT (BNC):	1.0 Vp-p, 75 ohm
VIDEO OUT (BNC):	1.0 Vp-p, 75 ohm
AUDIO OUT
(XLR, 3-pin, male):	+4 dBu, balanced, low-impedance
AUDIO CH1/CH2 OUT	(Menu setting to CH1/CH2/MIX)
(12-pin, TC IN/OUT
combined):	–20 dBu, unbalanced, low-impedance
VTR (26-pin, option):	1.0 Vp-p
TIME CODE OUT (12-pin):
PHONES (mini-jack×2):
Other	DC 11 to 17 V
DC IN (XLR, 4-pin, male):
DC OUT (4-pin):	DC 11 to 17 V, maximum rated current; 0.1 A
LENS (12-pin):
REMOTE (ECU, 6-pin):

Accessories

Shoulder belt (1)

Sony battery connector, NP-1 screw

Video input connector (1)

Weight and dimensions shown are approximate.

Specifications are subject to change without notice.

- 1 3 4 -