Manuals / Panasonic / Photography / Camcorder

Panasonic AJ- E operating instructions Zoom

Models: AJ- E

1 108

Download 108 pages 52.26 Kb

Page 43

Chapter 4 Adjustments and settings for recording

Display item	What is displayed	Status when display appears


> Zoom display	Z00 to Z99	This indicates the amount of zoom. Note that this item is not displayed
		even if the display setting is ON if the lens is not equipped with a zoom
		position return function.

? Interval, pre-rec	i (flashing)	This appears in the INTERVAL REC mode during the times when the
display		operation of the REC button is not acknowledged before the start of or
		at the end of recording.
	iREC (lighting)	This appears during an INTERVAL REC operation.
	iREC (lighting)	This appears during an INTERVAL REC operation.		4
	iREC (flashing) ¢¢h¢¢m/¢¢s	This appears during INTERVAL REC standby to indicate the wait time		4
		until the next recording.
	P-REC (flashing) ¢s	This indicates the amount of time remaining until the end of the set PRE
	P-REC (flashing) ¢s
		REC time during PRE REC operation.

@ ID recording	ID	This appears when the setting to superimpose the ID onto the camera
display		image and record the image with the ID has been established.

A Battery type	PRO14 to AC-ADPT	This indicates the type of battery selected on the menu. “AC ADPT”
		appears when an AC adapter has been input.

B Remaining battery	¢¢.¢V	This indicates the remaining battery charge in 0.1V increments.
charge/voltage	¢¢¢%	This indicates the remaining digital battery charge in percent.
	EMP	This appears when the battery has no charge left.
	MAX	This appears when the battery has a full charge.

C Unit’s REC display	REC	This appears when the extender unit and 26-pin connector (BOTH)
		have been connected to indicate the unit’s recording status using
		characters. It lights during recording, and it flashes while the unit’s
		mode is transferring to recording or when a warning has been issued.

D Remaining tape	¢¢¢min	Under normal conditions, “¢¢¢min” lights, and this starts flashing while
		the tape is reaching the end.
	= END	When the tape has reached the end, “= END” lights.
	= INH	When recording has been inhibited, “= INH” lights.

E Total length of	¢¢¢min	This indicates the total length of the cassette tape.
cassette tape		(This appears during a mode check.)

F Super iris ON/	S	This appears when S.IRIS has been set to ON.
super black ON	B	This appears when S.BLK has been set to ON.
	SB	This indicates the color temperature during the AWB operation.

G Color temperature	¢.¢K	This indicates the color temperatures assigned to the A, B, and PRE
		positions of the WHITE BAL switch. (These may be memory values
		during AWB operation or menu setting values.) This indication does not
		appear in the ATW MODE.

H Shutter	11/¢¢.¢	This indicates that the shutter speed is set to SYNCHRO SCAN.
speed/mode	1/60 - 1/2000	This indicates that a fixed shutter speed has been set.
	SUPER V	This appears when the SUPER V (mode with high vertical resolution)
		has been set.

I D.ZOOM	DZ	This appears when the D.ZOOM mode has been established.

43

Image 43

Panasonic AJ- E operating instructions Zoom

Contents

Model No Operating Instructions$ do not Remove Panel Cover by Unscrewing Lithium BatteryTo remove the battery/Verwijderen van de batterij Contents Specifications 106 Chapter Maintenance InspectionsMenu description tables Features of the camera unit Features of the VTR unit ≥ Metadata supported System configuration≥ Dvcpro Ieee 1394 digital input/output connector provided ≥ Built-in time code generator/readerPower supply and accessory mounting section Front Audio function section input systemRear Audio function section output system Shooting and recording camera unit Bars Shooting and recording VTR unitCAM. Auto Knee on CAM. Auto Knee OFF@ ECU Remote remote control connector = Output SEL output signal selection switchVideo OUT Character switch ? Video OUT video signal output connectorMenu operation section CTL Time code related sectionNDF Slave Hold W Remaining tape and remaining battery chargeDisplay window and its displays Displays relating to the VTR unit’s operations and modesDisplays relating to the time code Time code-related switch settings and display itemsMode displays TCG switch position Display switch Display item PositionViewfinder section Cassette tapes From providing the power supply to loading the cassette Basic proceduresUp to performing the switch settings Tape function buttons Procedure for shootingAdjust the white balance 3When adjusting the white balance on the spotEnsuring scene-to-scene continuity at other times Scene-to-scene continuityNews REC function SDC615 Scene-to-scene continuity during rec-pauseONE Shot Procedure for shooting in the on modesPRE-RECORDING function SDC905 Interval REC functionCheckpoints common to all Interval REC modes When the ONE Shot mode of Interval REC is toWhen the Interval REC mode is to be exited Procedure for shooting in the ONE Shot modeNormal playback and playback at different speeds When the Retake function is to be exitedRetake function Rec-review functionOutput CAM Adjusting the white balance and black balanceAdjusting the white balance White balance detection areaWhite balance memories When there is no time to adjust the white balanceWhen the white balance cannot be adjusted automatically Auto tracking white balance settingBlack balance memory Adjusting the black balanceUse this to execute ABB Viewfinder screen displays relating to the shutter Setting the electronic shutterSetting the shutter mode and speed Shutter modesItems to be set and what is set Selecting the recording signals and recording systemSetting the synchro scan mode Selecting the recording signalsSelecting the recording system Selecting the audio input signalsAdjusting the audio signal recording levels Concerning what is setUser bit memory function Setting the time dataSetting the user bits CTL Vtcg Time Date P-iRECRegion Setting the internal clock’s date and timeExternally locking the time code Setting the time codeTime code when the battery is replaced Operating procedure for external lockingExamples Setting the Umid informationConcerning the user bit setting during external lock To release the external lockMenu displays on the viewfinder screen Menu configurationBasic menu operations To set an item to on or OFF Selecting the user menusTo increment the value To decrement the valueSelecting the viewfinder screen display items Viewfinder screen status display configurationViewfinder screen status displays Viewfinder lamp displaysMode Check Display item What is displayed Status when display appearsAllocated to User InformationButtons Display White BAL switchFilter positions Cumulative gainZoom Viewfinder screen display selection Mode CheckZoom Setting the camera ID Setting the marker displaysSetting change/adjustment result messages and display modes Checking the return video signal on the viewfinder Mode check screen displays Mode Check button functionMarker check screen displays Marker Select button function Setting items and details Menu-driven function setupSetting the User SW Gain switching Selecting the video output signalsSelecting the F.AUDIO Level control function Setting items and what is setFunctions which can be selected Handling the setup card Setting the color temperature manuallyData handling Selecting the file No Setup card operationsFormatting the setup card Saving the data settings on the cardGiving a title to the selected file Saving the data settings to the selected fileLoading the data of the selected file Loading the data saved on the cardWriting the setting data in the user area How to use the user dataLoading the user data Writing the setting data used for the scene files How to use the scene file dataReading the setting data used for the scene files Scene Read User Data # Scene SEL Write Reset # Read Scene Read User Data Scene SEL Write Reset White BAL switch How to use the lens file dataOperation method without performing File menu operations Reference Supplying the powerAttaching the battery and setting the battery type Using the Anton Bauer battery packBattery holder Label Surface Using the BP-90 type battery packConnect here BP-90 type battery case Using the V-mount type battery pack Using the NP-1 type battery packNP-1 type Battery case +12V Attaching the viewfinder and adjusting its positionUsing an AC power supply When the AJ-B75 AC adapter made by Panasonic is usedLens socket Lever for Securing the lens Mount cap Attaching the lensMark Adjusting the white shading of the lens Adjusting the lens flangeApprox meters Set the White BAL selector switch to a or B, Giving a title to the selected file no Storing the lens file dataReading the lens file data When using the front microphone Audio input signal preparationsWhen using an external microphone When using a UniSlot wireless receiver When using a wireless receiverWhen using an audio component When using an externally connected wireless receiverDetaching the unit from the tripod attachment Adjusting the position of the shoulder padMounting the unit on a tripod Attaching the shoulder beltExample showing use of the SHAN-RC700 rain cover Connecting the extension control unit AJ-EC3EAttaching the rain cover Attaching the Front Audio Level control knobPreparation for inspections Inspections prior to shootingInspecting the camera unit Tape travel inspection Automatic audio level adjustment function inspectionManual audio level adjustment function inspection Inspecting the VTR unitSelf-diagnosis function Inspection using external microphonesInspections relating to the time code and user bits Maintenance Push Connectors and signalsREC Warning Battery ENDSlack Tape ENDHumid Wireless RFServo Tape Near END Battery Near ENDError codes Error codes 81 to 92 relating to the Dvcpro connectorPush in and turn at Emergency ejectEmergency Eject screwHow to open the menus Menu configurationHow to interpret the menu lists CAM System ModeRED Option Mode 6SEC REC FunctionOn Memory ONE Shot26P EXT For Output SELGenlock INTMatrix 1 ROPColor Correction LOW Setting Black Strech MID SettingHigh Setting $ Master GainDirection Additional DTL=SKIN Tone Area Flare For setting the Master GammaKNEE/LEVEL GammaVideo level Camera SettingsVF Displays Zebra pattern displayBAR VF INDICATOR1VF Marker User BOXSAVE&TAPE VF INDICATOR2Mode Check IND 7 !LEDShutter Speed Camera IDShutter Select Split SW ModeUser SW SmpteUser SW Gain White Balance ModeCard R/W Select FileIris Card READ/WRITEInitialize DiagnosticLens File System CheckReview Black ShadingWhite Shading VTR FunctionBattery SETTING1 BATTERY/TAPEData storage Range HYTRON120 END Battery SETTING25 MIC/AUDIO1 7 TC/UB 6 MIC/AUDIO2Umid SET/INFO VTR DiagOption Config DfltID MIX INH Analog component output Video SystemAudio System Other Connectors Audio Output ConnectorsTime Code Input Connector Time Code Output ConnectorPanasonic Broadcast Europe Panasonic Marketing Europe GmbH