Panasonic AJ- E Storing the lens file data, Giving a title to the selected file no

Chapter 5 Preparation
Storing the lens file data		6 Press the JOG dial button again and turn it until the
The white shading adjustment values can be stored in the unit			character to be set is displayed.
as lens file data.			When the button is turned, the character displayed is
			switched in the following sequence:
			Space: ∑
Selecting the file No.
			7
			letters: A—Z
1 Perform a menu operation to open the <LENS FILE>
			7
screen from the FILE page, and turn the JOG dial button			numbers: 0—9
to move the arrow (cursor) to the FILE NO. item.			7
2 When the JOG dial button is pressed, the file number			symbols: ’, >, <, /, –, •, a
		7
			Press the JOG dial button to enter the character.		5
starts flashing.	Turn the JOG dial button and select the
lens file (1 to 8) in which the data is to be stored.
< LENS FILE >		8 Turn the JOG dial button to move the arrow (cursor) to
# FILE NO.	:1		the next position (right), and repeat steps 6 and 7 to set
			the characters.	(No more than 12 characters may be
READ
WRITE			entered.)

TITLE : ************

1:5:

2:6:

3:7:

4:8:

9 When the characters have been input, turn the JOG dial button to move the arrow (cursor) to the “:” position.

10 When the JOG dial button is pressed, the arrow (cursor) returns to the “TITLE:” item.

3 Press the JOG dial button to enter the lens file.

Giving a title to the selected file NO.

11 Turn the JOG dial button to move the arrow (cursor) to the “WRITE” item.

12 When the JOG dial button is pressed, the following message appears.

4 Turn the JOG dial button to move the arrow (cursor) to the “TITLE:” item.

< LENS FILE >
FILE NO.	:1
READ
WRITE

#TITLE : ************

1:5:

2:6:

3:7:

4:8:

WRITE?

YES

#NO TITLE:

5 When the JOG dial button is pressed, the arrow (cursor) moves to the title input area, and the input mode is established.

13 Turn the JOG dial button to move the arrow (cursor) to YES, and press the JOG dial button.

When writing is complete, “WRITE OK” is displayed, indicating that the setting data and title have been stored in the lens file area of internal memory.

< LENS FILE >

FILE NO. :1

READ

WRITE

;

TITLE : ************

1:5:

2:6:

3:7:

4:8:

14 Press the MENU button to exit the menu operations.

65