Panasonic AJ- E operating instructions System Mode, Cam, Red

Chapter 7 Menu description tables

7-2 SYSTEM SETTING

7-2-1 SYSTEM MODE

	Item/			Variable		Remarks
	Data storage			range
REC SIGNAL				CAM	For selecting the video input signals.
				VIDEO	CAM:	The signals from the camera are
				1394		recorded.
					VIDEO: The signals from the GENLOCK IN
						connector are recorded.
					1394:	The signals from the DVCPRO
						connector are recorded.
					<Note>
					CAM is always set when the power is next
	C U	F	E		turned on after it being turned off.
REC MODE				16:9/50M	For selecting the mode in which to record the
				4:3/50M	signals on the VTR.
	SDC905
				16:9/25M	16:9/50M: <16:9> signals are recorded at 50
				4:3/25M		Mbps.
					4:3/50M: <4:3> signals are recorded at 50
						Mbps.
					16:9/25M: <16:9> signals are recorded at 25
						Mbps.
					4:3/25M: <4:3> signals are recorded at 25
	C U	F	E			Mbps.
ASPECT				16:9	For selecting the mode in which to record the
				4:3	signals on the VTR.
	SDC615
					16:9:	<16:9> signals are recorded.
	C U	F	E		4:3:	<4:3> signals are recorded.
PB MODE				MANUAL	For selecting the playback mode.
				AUTO	MANUAL: The playback mode accords with the
	SDC905
						25M or 50M setting of the REC
						MODE item.
						Operation proceeds with 16:9 or 4:3
						read from the tape.
					AUTO: In this mode, the recording mode is
						automatically detected and playback
	C U	F	E			is performed in the same mode.
REC TALLY				RED	For selecting the method used to inform the
				GREEN	user that the unit is recording when a system
				CHAR	using an extender or other device is
					configured and BOTH is selected as the 26-
					PIN CONTROL menu item setting while the
					system is used in the remote control mode.
					RED:	The red tally lamp lights.
					GREEN: The green tally lamp lights.
					CHAR: The letters “REC” appear on the
	C U	F	E			viewfinder.

7

The underlining in the variable range column indicates the setting in the preset mode.

81