How to install the 5-inch bay units (continued)

5 Install the removed brackets on the 5-inch bay unit.

(Use the screws provided.)

5-inch bay unit brackets

5-inch bay unit to install

6 Insert each 5-inch bay unit on a shelf, and then connect the wire harnesses to the power connector and SATA signal connector on the back of the bay unit.

For connection details, refer to the operating instructions for the 5-inch bay units.

7 Anchor the 5-inch bay unit brackets to the main unit using the left and right anchoring screws.

8 Put the front panel back in its original position (using the 4 screws).

9 Close the top panel, and tighten the top panel screws (x2).

We recommend you to use the following HDD:

Connect IF:

SATA-2

Appearance:

3.5-inch internal type

Rotating number: above 7200

10