Checking the clips in P2 card/HDD (continued)
Copying individual clips (COPY) | Deleting individual clips (DELETE) |
This function button is not displayed when HDD is selected.
When the COPY button is pressed after the file has been selected (blue framed) on the EXPLORE screen, the copy destination selection screen appears.
(In the RAID1 mode)
(In the JBOD mode)
Select the copying destination and press OK button to start the copying.
If Verify = ON button is set in the SETTING screen (page 39), it will Verify automatically after the copying. After the copying (or Verifying) is completed, the completion confirmation screen appears.
If the YES button is pressed on the confirmation screen, the EXPLORE screen which displays the folders and icons on the HDD will appear.
If the NO button is pressed instead, the main screen is restored.
When the DELETE button is pressed on the EXPLORE screen, the selected clip (blue framed) can be deleted. “DELETE CLIP NUMBER” displays the number of clips selected.
AB
You can do deleting operation according to the following methods.
ARECYCLE button
Move the clips to RECYCLE folder.
If necessary, the clips can be restored. (Page 35) However, this button cannot be used with P2 cards.
BERASE button
Delete from HDD completely.
Select the deleting method and press DELETE button, the clip will be deleted.
Press CANCEL button, you will go back to the thumbnail screen without deletion.
27