System setting
Press SETTING button to set the system in the main screen.
This SETTING screen is constructed by plural TAB as the following. For details, refer to the explanations for each individual tag
Configuring network settings (Network)
Set network access of LAN1 as well as LAN2.
A 
B
Specifying the display language (Language)
Select the language you want to use in all the screens.
A 
B
C
D
E
F
C
D
AAdapter
Select rear panel LAN connector. (Page 7)
BDHCP
This sets the IP address automatically.
The IP address is allocated automatically from the DHCP server if a DHCP server is available in the network environment connected.
CSTATIC IP
With this, the IP address is set manually.
Input from the numeric keypad on this screen and press CONFIG IP button to set.
•IP Address
Indicate the IP address you set or set by the server.
•Sub Mask
Indicate the sub mask you set.
•Gateway
Indicate the gateway you set.
DKeyboard
Use this numeric keypad to input IP address when setting address manually.
ECONFIG IP button
Press this button to confirm manual IP address setting after inputting the address.
FCLOSE button
Return to the main screen.
A 
displaying in Chinese
BENGLISH displaying in English
CAPPLY button
Set to selected language.
DCLOSE button
Return to the main screen.
Even if the APPLY button is pressed, the display will not be switched.
After the unit is restarted, the display will be in the selected language.
38