Setting the RAID function (continued)

Deleting RAID drives (Delete RAID)

Press NEXT button after setting, the confirming screen will display. Please press OK button.

(In the RAID1 mode)

(In the JBOD mode)

When HDDs of different capacities have been set as RAID1, the smaller size of the two installed HDDs is displayed in Logical Drive Size.

Please press OK button in the further confirming screen.

When the OK button on the reconfirmation screen is pressed, all the data on the HDD is deleted. Make sure that you do not need the data before pressing this button.

Press the OK button when a message is displayed after RAID initialization. The unit can now be used as a RAID drive.

When switching between RAID1 and JBOD or otherwise changing the RAID level, delete the logical drive which is currently set.

When the RAID level is re-set, the data on the HDD will be deleted so take care before proceeding.

A

B

AHDD-related information

●Select

The button will flash green when selected.

●Assigned Name

Display the RAID board connection location and RAID level.

●Array ID

Displays RAID control number.

●Capacity

Displays RAID disk capacity.

●Status

Displays operating conditions.

BCLOSE button

Return to the main screen.

The HDD is indicated as a theoretical device. Select the device you want to delete and press OK button, a confirming message will display.

Press OK button and the selected theoretical device will be deleted from the theoretical device list.

After the finished message is displayed, Press the OK button.

19