Version up

Follow the steps below to proceed with version updating.

1 The version update module which is downloaded from the Panasonic home page contains compressed files so unzip them.

For further details about the updating methods, refer to the following website. https://eww.pavc.panasonic.co.jp/pro-av/

2 On the main screen, press the UPDATE button.

The following message is displayed.

3 At the time when step 2 is taken, copy the data which was unzipped in step 1 into the unit's version update folder (C:\ P2WriterUpdate) over the network from the PC used to download the data.

4 After copying the data, please push the OK button.

5 If a new version is found, the version will be updated automatically. A message prompting you to restart the unit is then displayed so restart the unit.

If only the data for an old version is found, the version is not updated.

6 After the unit has been restarted, check that the version has been updated successfully by noting the version number on the ABOUT screen.

Press OK button to go back to the main screen. The number of the version is indicated in "X.X.XX" displayed in the dialog box.

45