Checking the clips in P2 card/HDD (continued)
soft keyboard
A | G H |
B |
|
C | E |
D | F |
AMODE
The names of the modes corresponding to the items are displayed here.
•Alphanumeric characters can be inputted when [Character String Mode] is displayed.
•Only numbers can be inputted when [Number Mode] is displayed.
BInput column
Inputted alphanumeric characters are displayed.
CESC button
This restores the original Meta Data screen.
DCAPS LOCK button
This switches the letters between the upper case and lower case.
EBACKSPACE button
This deletes the character in front of the character where the cursor is located.
FENTER button
This enters the currently displayed data.
G← button
This moves the cursor in the input field toward the left.
H→ button
This moves the cursor in the input field toward the right.
Input instructions are as follows.
1.To enter letters, press keys on the
2.To confirm input, press the ENTER button.
Select listed devices (device selection buttons)
When the Device Selection Button is pressed on the EXPLORE screen, the devices to be displayed on the thumbnail screen are selected.
A
B
C
D
E F
AALL SLOTS button
This displays all the slots.
BALL HDDS button
This displays all the HDD.
This display will not appear when in RAID mode.
CHDD1 button / HDD2 button / RAID1 button HDD will be selected for each when in HDD mode. This button will be displayed as [RAID1] when in RAID mode.
DSLOT1 button ~ SLOT5 button
These are used to select and display the slots.
EOK button
Thumbnails are displayed in the case of P2 cards. Folders are displayed in the case of the HDDs.
FCANCEL button
Close this screen and return to the EXPLORE screen.
Select devices as follows.
●P2 cards
Select the P2 card slot you require (either the ALL SLOTS or individual SLOT
●HDDs
Select the HDD you require (from among the ALL HDDS, HDD1 or HDD2, or RAID1 button), and then press the OK button.
29