System setting (continued)
Checking SMART Info
“SMART” is an abbreviation of
This function is incorporated within hard disk drives in order to quickly discover any problems the drive and estimate the extent of the damage.
BTemperature Threshold Set
Alarm messages are displayed if HDDs exceed the specified temperature. If the APPLY button is not pressed after these settings have been changed, the new settings will not be reflected.
B
A
C
D E
● Low (Setting range: 0 °C to 10 °C) |
When the temperature falls below this setting, |
the |
setting: 5 °C) |
● High (Setting range: 50 °C to 60 °C) |
When the temperature rises above this setting, |
the |
setting: 55 °C) |
● + button |
When this is pressed, the temperature setting is |
AS.M.A.R.T. Information
●Drive Model
The model numbers of the HDD currently used are displayed in this column.
●Temperature (°C)
The current temperatures of the HDD are displayed in this column.
●Power On Hours
The total
●Write Cache
These can be used to set the Write Cache of the HDD to ON or OFF.
ON button:
The response to data writing is faster but it may actually take a short while for the data to be written on the HDD.
OFF button:
The response time is longer than at the ON setting, but the data will definitely be written. (This is the factory setting.)
increased. |
● – button |
When this is pressed, the temperature setting is |
reduced. |
When these settings are changed, the following message is displayed.
COperation Time
Displayed here is the main unit's operation time.
DAPPLY button
Set the Write Cache mode and the Temperature Threshold Set value in the S.M.A.R.T. Information box.
ECLOSE button
Return to the main screen.
40