How to install the 5-inch bay units

Follow the steps below to install the 5-inch bay units.

5-inch bay units and HDDs sold separately.

1 Remove the screws (x2) of the top panel, and remove the top panel.

2 Remove the screws (x2) at the left and right and also the screws (x2) at the top of the front panel, and remove the panel. (Total: 4 screws)

3 Remove the screws (x2 each) securing the 5-inch bay unit cover to the front panel, and then remove the cover.

4 Loosen the left and right anchoring screws of the 5-inch bay unit brackets, and then remove the brackets from the main unit.

(x1 screw each at left and right for each 5- inch bay unit)

Exercise caution when removing the front panel since the screw at the top left in the figure above will catch on the transparent panel.

(Continued on next page)

9