
Power Supply
A battery or external DC power supply can be used as the power supply for the unit.
Mounting the Battery
1 Mount an Anton/Bauer battery.
Anton/Bauer Battery
2 Insert the battery and slide it in the direction of the arrow.
Release lever
3 Set the battery type.
Specify the type of battery on the [Battery] tab of the "SETTING" screen. (page 41)
Removing the battery
Completely push down and hold the release lever on the battery holder. Then, slide the battery in the opposite direction to the arrow while holding the lever down.
The following is a list of batteries that have been tested and verified to work with this unit.
•PROPAC14
•TRIMPAC14
•HYTRON50
•HYTRON140
•DIONIC90
•DIONIC160
8