Setting the RAID function (continued)
Viewing basic RAID information (Basic Information)
The statuses concerning the HDDs used and RAID are displayed.
A
B
C
APhysical Drive
The following information about the HDD installed is displayed.
●Drive Model
Display the HDD product numbers.
●Port
Display the numbers of the ports where the RAID boards are connected
●Temperature
Display the temperatures of the HDDs
●Capacity
Display the memory sizes of the HDDs
●Status
Setting up RAID drives (Create RAID)
When RAID is
This is used when specifying either JBOD mode with separate logical drive names for each HDD or RAID1 mode with mirrored HDDs.
This job is required when installing a new HDD. (In the RAID1 mode)
A
B
C
D
E
(In the JBOD mode)
A
B
C
D
E
Display the statuses of the individual HDDs
BLogical Drive
●Assigned Name
Display the setting names
●Raid Level
Display either JBOD or RAID1
●Capacity
Display the memory size of the HDDs
●Status
ARAID1 button
This is used when writing the same data simultaneously onto two HDDs.
BJBOD button
Using each HDD as an individual device.
C
The HDD manufacturer name, product number, and disk size will be displayed on the
In JBOD mode, the HDD may be selected with the button on the left.
Display the statuses
●UNMOUNT button (page 17)
Press this when logically isolating the HDD before it is unmounted.
If the HDD is not installed, this button will not be displayed.
CCLOSE button
Return to the main screen.
DNEXT button
This continues settings.
ECLOSE button
Return to the main screen.
18