Playing the clips
The PLAYER application starts up when the PLAY button is pressed after the clips to be played have been selected on the EXPLORE screen.
| O |
L | G |
M | P |
N |
|
A B C D E F H I J | K |
A
(PREV button)
Each time this button is pressed, play jumps to the start of the previous clip.
B
(REW button)
When this button is pressed, clips are played rapidly in reverse, skipping frames, at the playback speed specified on the SETTING screen (page 33).
C
(PLAY button)
Press this button to play the clip.
D
(PAUSE button)
Press this button to stop playing temporarily.
E
(FF button)
When this button is pressed, clips are played forward rapidly, skipping frames, at the playback speed specified on the SETTING screen (page 33).
F
(NEXT button)
Each time this button is pressed, play jumps to the start of the next clip.
In the final clip, press the button again to jump to the end of the clip.
G
(Volume Up button)
This increases the volume level of the sound.
H
(Volume Down button)
This reduces the volume level of the sound.
IVOLUME
The slider is slid by operating the + and - buttons on the left.
JSETTING button (page 33)
Set the speed in the REW and FF.
KCLOSE button
Stop playing clips in PLAYER and go back to EXPLORE screen.
LTIME CODE
Indicate the time code of the clip being played now.
M CLIP NAME
Indicate the name of the clip being played now.
NDURATION
Indicate the duration of the clip being played now.
OSlider
You also can move the slider in the bottom of the screen to move to the designated position.
PPower supply indicator (page 16) Shows the power supply status.
•Black burst may occur between clips. This does not indicate a mechanical problem.
•Because playback relies on software codecs, some frames are skipped.
32