Copying
The data on the recorded P2 cards is copied onto the HDD.
The data is copied from the P2 card onto the HDD on a card by card basis or clip by clip basis (see page 27). Use the copying method that best suits the application concerned.
Copying entire cards
Two copy modes are available when copying entire cards, as follows.
•Manual copy mode: Data is copied after inserted P2 cards are selected.
•Auto copy mode: Data is automatically copied from inserted P2 cards.
To switch between auto and manual copy modes and complete the settings, access the [Copy Settings] tab on the "SETTING" screen (page 39).
Manual copy mode
Insert the P2 card to copy and press the COPY button on the main screen. Next, complete the copy settings as follows.
(In the RAID1 mode)
A | B |
CD
(In the JBOD mode)
A | B |
CD
ASOURCE
Select the P2 card to copy.
(Multiple cards in slots
BDESTINATION
Select the destination for copying.
In RAID1 mode, there is only one destination available, and there is no need to select it.
CSTART button
Start manual copying.
DCLOSE button
Return to the main screen.
22