Setup menus (continued)
SYSTEM menu
No./Item |
| Description |
|
| |
|
| |
18 | System phase adjustment. | |
SYS H OFFSET | 0000 | |
| 0001 | |
| 0002 | |
| 0003 | 0 : 0 sec |
| 0004 | 1 : +4.52 µsec |
| 0005 | 2 : +8.96 µsec |
| 0006 | 3 : +13.4 µsec |
| <Note> | |
| Factory settings will remain unchanged even if | |
| an attempt is | |
|
| |
19 | This sets whether the system phase is to be | |
| adjusted by the unit or from the external | |
SYS SC/H | encoder remote controller. | |
| 0000 | REMOTE : |
| The system phase is adjusted from the | |
| external encoder remote controller. | |
| 0001 | LOCAL : |
| The system phase is adjusted by the unit. | |
| <Note> | |
| The setting of this menu item has no effect when | |
| the ENC CONTROL switch is at the LOCAL | |
| setting. | |
|
|
|
The underlined items indicates the initial setting.
No./Item |
| Description |
|
| |
|
| |
30 | This adjusts the brightness of the LCD | |
| monitor on the front panel. | |
BRIGHT |
|
|
| 0000 | |
| : | : |
| 0007 | 0 |
| : | : |
| 0014 | 7 |
| <Note> |
|
| If setting operation is performed, the setting | |
| value does not return to factory (default) setting. | |
|
| |
31 | This adjusts the contrast of the LCD monitor | |
| on the front panel. | |
CONTRAST |
|
|
| 0000 | |
| : | : |
| 0007 | 0 |
| : | : |
| 0014 | 7 |
| <Note> |
|
| If setting operation is performed, the setting | |
| value does not return to factory (default) setting. | |
|
| |
40 | This selects whether the system file lock | |
| mode is to be engaged or released. | |
MENU LOCK |
|
|
| 0000 | OFF : The lock is released (file data |
|
| can be changed). |
| 0001 | ON : The lock is engaged (file data |
|
| cannot be changed). |
| <Note> |
|
| Setup menu No. 00 (WFM SEL) can be changed | |
| at any time regardless of the setting selected for | |
| this menu item. | |
|
|
|
Video output signal adjustments
The video output signals are adjusted using combinations of the ENC CONTROL switch position and SYSTEM menu item No.19 (SYS SC/H) setting.
These adjustments can be used for analog component, analog composite and SDI signal output. A control matrix of the adjustments is shown below.
| Setting |
| Item adjusted | ||
|
|
|
|
|
|
ENC CONTROL |
| SYSTEM menu item | SYSTEM menu item |
| Bottom of front panel |
switch position |
| 19: SYS SC/H | 11: SYS SC COAR. |
| VIDEO LEVEL |
|
|
| 12: SYS SC FINE |
| CHROMA LEVEL |
|
|
| 13: SYS H |
| SET UP/BLC |
|
|
|
|
| HUE/CHROMA PH |
|
|
|
|
|
|
LOCAL |
| LOCAL | Unit |
| Unit |
|
|
| |||
| REMOTE |
| |||
|
|
|
|
| |
|
|
|
|
|
|
|
| LOCAL | Unit |
|
|
REMOTE |
|
|
|
| External encoder remote controller |
| REMOTE | External encoder | remote | ||
|
| controller |
|
| |
|
|
|
|
| |
|
|
|
|
|
|
39
