Panasonic AJ-SD965 Moni CH SEL, Pcm, Cue Rec Cue, PB Fade, Embedded AUD, Cue Out Sel, MON Auto

Setup menus (continued)

USER menu		<AUDIO>
No./Item			Description
721	This selects the monitor output.
MONI CH SEL		0000	MANU :
		The output signal is as selected in MONITOR
		SELECT buttons.
		0001	AUTO :
		PCM AUDIO output is selected within the
		–0.43 (–0.5)ato +1a speed range; CUE is
		automatically selected for all other tape
		speeds.
		<Note>
		The value for the DV/DVCAM tape is shown in
		parenthesis ( ).
		0002	PCM :
		The PCM AUDIO signal is output over the
		–10ato +10a range.
	<Note>
	This setup menu’s setting takes effect when
	CH1, CH2, CH3 or CH4 has been selected by
	the L and R MONITOR SELECT buttons on the
	front panel. (If CUE has been selected, the cue
	signal will be output at all the speeds regardless
	of the setup menu’s setting.)
726	This selects the input signal recorded in
	CUE.
REC CUE
		0001	CH1 : Audio CH1 input
		0002	CH2 : Audio CH2 input
		0003	CH1+2 : Audio CH1 and CH2 MIX signal
		0004	CH3 : Audio CH3 input
		0005	CH4 : Audio CH4 input
		0006	CH3+4 : Audio CH3 and CH4 MIX signal
		0007	CH1~4 : Audio CH1, CH2, CH3 and CH4
			mixed signals
727	This selects the processing method for the
	audio edit points (IN point, OUT point) during
PB FADE	playback.
		0000	AUTO : According to the status during
			recording.
		0001	CUT : Forced CUT
		0002	FADE : Forced FADE
728	This selects whether to superimpose the
	audio data onto the SDI output.
EMBEDDED
AUD		0000	OFF : Data is not superimposed.
		0001	ON : Data is superimposed.

No./Item		Description
731	This selects whether or not the cue signal is
	to be output to the main line output in the
CUE OUT SEL	search mode.
	0000	OFF : CUE is not output.
	0001	ON : CUE is output.
	<Notes>
	OThis function works only when a setting
	other than MANU has been selected by
	setup menu No. 721 (MONI CH SEL).
	OThe main signal system output channels
	used for the CUE output differ depending
	on the setting selected by setup menu No.
	735 (MON AUTO SEL).
	When L/R is selected:
		CUE is output to CH1 to CH4.
	When L is selected:
		CUE is output to CH1 and CH3.
	When R is selected:
		CUE is output to CH2 and CH4.
	OWhen PCM has been selected as the setup
	menu No. 721 (MONI CH SEL) setting,
	PCM is output.
733	This selects the timing for the output picture
	and CUE output when CUE has been
CUE OUT	selected for monitor output.
	0000 NORMAL : The timing is aligned with the
		output picture.
	0001 DIRECT : Whatever has been recorded on
		the tape is output with no delay.
	<Note>
	When DIRECT has been selected, the timing of
	the output picture and that of the cue output are
	not aligned properly.
734	This selects whether the operation of the
	AUDIO MON SEL button on the front panel is
MONI SEL INH	to be enabled or disabled.
	0000	OFF : Operation is enabled.
	0001	ON : Operation is disabled.
	0002	ON1 :
	Operation is disabled in the FULL display
	mode and enabled only in the FINE display
	mode.
735	Although CUE is automatically output to the
	monitor output in accordance with the
MON AUTO	operation mode when a setting AUTO has
SEL	been selected by setup menu item No. 721
	(MONI CH SEL), the MON AUTO SEL setup
	menu item is used to select the monitor
	channel which is to be automatically
	switched to CUE.
	0000	L/R :
	CUE is output to both the left and right
	channels.
	0001	L :
	CUE is output to the left channel only.
	0002	R :
	CUE is output to the right channel only.

The underlined items indicates the initial setting.

56