Panasonic AJ-SD965 Int Sg, OUT Vsync, Mute SEL, CC F1 Blank, CC F2 Blank, Freeze SEL, OUT C Kill

Setup menus (continued)

USER menu		<VIDEO>
No./Item			Description
600	This selects the internal reference signal.
INT SG		0001	BB :
		The black burst is generated.
		0002	CB100 :
		100% color bars are generated.
		0003	CB75 :
		75% color bars are generated.
601	This selects whether to float the vertical sync
	position of the video output in order to align
OUT VSYNC	the video output phase with the input in the
	EE/record/edit modes.
		0000	N-VF :Signals are not floated.
		0001	VF : Signals are floated.
602	This selects whether to mute the video
	output signals when a blank on the tape has
V-MUTE SEL	been detected during playback.
		0000	N-MUTE :No muting. (Freeze)
		0001	LOW RF : Muting. (Set to gray.)
603	This selects ON or OFF for the closed
	caption signal of the first field.
CC (F1) BLANK
		0000	BLANK : Signal is forcibly blanked.
		0001	THRU : Signal is not blanked.
	<Note>
	This setup menu is not displayed in the 625i
	system.
604	This selects ON or OFF for the closed
	caption signal of the second field.
CC (F2) BLANK
		0000	BLANK : Signal is forcibly blanked.
		0001	THRU : Signal is not blanked.
	<Note>
	This setup menu is not displayed in the 625i
	system.
605	This selects the freeze mode for still
	pictures.
FREEZE SEL
		0000	FIELD : Field freeze.
		0001	FRAME : Frame freeze.
	<Note>
	When frame freeze has been selected, the frame
	slow status is established with the slow setting.
606	This selects chroma color killer processing
	for the video output signals.
OUT C KILL
		0000	B/W : No color signals are output.
		0001	COLOR : Color signals are output.

No./Item		Description
609	This selects whether to superimpose EDH
	onto the SDI output signals.
EDH
	0000	OFF : EDH is not superimposed.
	0001	ON : EDH is superimposed.
	<Note>
	Even when ON is selected for this setting, EDH
	is not superimposed onto the signals output from
	the SDI OUT 3 connector if the SUPER switch
	on the front panel of the unit is set to ON.
610	This selects the analog component input
	level.
PB/PR IN LV
	0000	M II : M II level
	0001	B-CAM :ß-CAM level
	<Notes>
	OThis setup menu is not displayed in the 625i
	system.
	OWhen no optional board (AJ-YA931G) has
	been installed, setup menu No. 610 is not
	displayed.
611	This selects Y/C separation processing for
	the composite input signals.
YC SEP MODE
	0000	B/W :
	The signals are processed as B/W signals.
	0001	AUTO :
	The signals are automatically detected.
	<Note>
	When no optional board (AJ-YA931G) has been
	installed, setup menu No. 611 is not displayed.
614	This selects the analog component output
	level.
PB/PR OUT LV
	0000	M II : M II level
	0001	B-CAM :ß-CAM level
	<Note>
	This setup menu is not displayed in the 625i
	system.
618	This selects the interpolation operation.
	Vertical interpolation is conducted automatically
INTERPOLATE	during slow-motion playback to reduce the
	vertical movement of the playback pictures.
	However, this menu item enables the
	interpolation operation to be forcibly turned off.
	0000	OFF :
	Interpolation is forcibly turned off.
	0001	AUTO :
	Interpolation is automatically turned on during
	slow-motion playback.

The underlined items indicates the initial setting.

51