Panasonic AJ-SD965 External synchronization of video output signals, Internal synchronization

Video output signals and servo reference signal

This section explains how the output signals and servo reference signal are selected.

External synchronization of video output signals

The video output signals are output in synchronization with the REF VIDEO input signal or video input signal. As shown in the figure below, this signal is selected in accordance with the setup menu settings, VTR mode and availability of the video input signal.

<Notes>

Synchronization is determined as follows depending on the availability of the REF VIDEO input signal when “BB”, “CB100” or “CB75” has been selected as the setup menu No. 600 (INT SG) setting.

O When the REF VIDEO input signal is available: Synchronization with the REF VIDEO input signal

O When the REF VIDEO input signal is not available: Internal synchronization

	Start
EXT	What is the
	setup menu No. 304 (SERVO
	REF) setting?
	AUTO/AUTO1
	Is the unit	YES
	in one of the editing
	modes?
	NO
	Has the unit	YES
	been set to the recording
	mode?
	NO		N-VF	What is the
				setup menu No. 601 (OUT
				VSYNC) setting?
		Is the	NO	VF
		REF VIDEO input signal
		available?
		YES	AUTO	What is the
				setup menu No. 304 (SERVO
				REF) setting?
				AUTO1
			NO	Is the
				video input signal available?
				YES
				Is the	NO
				video input signal a composite
				signal?
				YES
			NON-STD	What is	STD
				the setup menu No. 303
				(STD/NON-STD)
				setting?
				AUTO
			NON-STD	Is the
				video input signal a standard
				or non-standard signal?
	Is the	YES		STD
	REF VIDEO input signal
	available?
	NO

Internal synchronization

Synchronization with the REF VIDEO input signal

Synchronization with the video input signal

65