Panasonic AJ-SD965 manual Memory stop function

Setup menus (continued)

USER menu		<OPERATION>
No./Item			Description
109	This selects whether to rewind the tape
	automatically to the tape start when the tape
AUTO REW	end is detected.
		0000	OFF : The tape stops at the tape end.
		0001	ON : The tape is rewound to the tape
			start.
110	This selects whether the VTR is to stop
	automatically when the counter value
MEMORY	reaches “0” during a fast forwarding or
STOP	rewinding operation in the CTL mode.
		0000	OFF : The VTR does not stop.
		0001	ON : The VTR stops automatically.
	<Notes>
	OThe stop mode concerned is either the stop or
		the still-picture (SHTL STILL or SLOW STILL)
		mode depending on the setup menu No. 315
		(AFTER CUE-UP) setting.
	OWhen both the AUTO REW function and
		MEMORY function have been selected at the
		same time, the AUTO REW function takes
		precedence.

Memory stop function

	The MEMORY STOP function
Zero	does not work if it is activated
point	within a range of 0 ± 2 frames.

	3 REW	1	FF
	button		button
4	FF		2	REW
	button			button

!When the FF button is pressed, the VTR performs the regular fast forward operation since the zero point is not located in the direction of operation.

@When the REW button is pressed, the PREROLL lamp lights (the SHTL lamp lights as well), the VTR proceeds with the preroll operation, and it automatically stops when it reaches the position where the counter reads “0.”

#When the REW button is pressed, the VTR performs the regular rewinding operation since the zero point is not located in the direction of operation.

$ When the FF button is pressed, the PREROLL lamp lights (the SHTL lamp lights as well), the VTR proceeds with the preroll operation, and it automatically stops when it reaches the position where the counter reads “0.”

No./Item		Description
111	This selects the output picture in the
	STANDBY OFF (HALF LOADING) and EJECT
FRZ MODE	modes.
SEL
	0000	DIS :
	The video output is muted.
	0001 STB OFF :
	When the STANDBY OFF (HALF LOADING)
	mode is established, the picture being played
	back at the time is frozen and output.
	0002 SOF&EJ :
	When the STANDBY OFF (HALF LOADING)
	or EJECT mode is established, the picture
	being played back at the time is frozen and
	output.
	<Notes>
	OFreeze status complies with the setup menu
	item No. 605 (FREEZE SEL) setting.
	OIn the EJECT mode, freeze is output only
	when BLACK, BLACK1, GRAY or GRAY1 is
	selected as the setup menu item No. 105
	(AUTO EE SEL) setting.
112	This selects whether video input switching
	using the INPUT SELECT button is to be
V IN SEL INH	enabled or disabled.
	0000	OFF :
	Video input switching using the INPUT
	SELECT button is enabled.
	0001	ON :
	Video input switching using the INPUT
	SELECT button is disabled.
	0002	REC :
	Video input switching using the INPUT
	SELECT button after the unit has been
	transferred to a recording (but not editing)
	mode is disabled.
113	This selects whether audio input switching
	using the INPUT SELECT button is to be
A IN SEL INH	enabled or disabled.
	0000	OFF :
	Audio input switching using the INPUT
	SELECT button is enabled.
	0001	ON :
	Audio input switching using the INPUT
	SELECT button is disabled.
	0002	REC :
	Audio input switching using the INPUT
	SELECT button after the unit has been
	transferred to a recording (but not editing)
	mode is disabled.
	<Note>
	Even when the ON or REC setting is selected to
	disable audio input switching using the INPUT
	SELECT button, it is still possible to set the
	setup menu items No. 715 (CH1 IN SEL), No.
	716 (CH2 IN SEL), No. 717 (CH3 IN SEL), No.
	718 (CH4 IN SEL), No. 719 (D IN SEL12) and
	No. 720 (D IN SEL34).

The underlined items indicates the initial setting.

43