Panasonic AJ-SD965 manual Edit

Setup menus (continued)

USER menu		<EDIT>
No./Item			Description
301	This selects the operation to be performed
	when an edit point has been set incorrectly
IN/OUT DEL	(when the OUT point is before the IN point).
		0000	MANU :
		Editing is not executed unless the illegal edit
		point is cleared or set again properly.
		0001	AUTO :
		The edit points already input are automatically
		cleared.
303	This selects STD or NON-STD in accordance
	with the composite input signal.
STD/
NON-STD		0000	AUTO :
		Standard/non-standard		signals	are
		automatically identified and processed.
		0001	STD :
		Standard signals are processed. (Forced
		STD)
		0002 N-STD :
		Non-standard signals are processed. (Forced
		NON-STD)
	<Note>
	Use the non-standard (N-STD) setting when
	video or audio trouble occurs with signals from
	laser discs or a satellite.
304	This selects the video signal processing.
SERVO REF		0000	AUTO :
		Servo is synchronized with the input signal
		during recording and editing, or with the REF
		signal during playback.
		With the EE output, the servo is synchronized
		with the internal reference signal when there
		is no REF signal.
		0001	EXT :
		Servo is synchronized at all times with the
		REF signal.
		0002	AUTO1 :
		Select this setting to use a standard signal as
		the input signal.
		The servo is synchronized with the input
		signal during recording or editing and with the
		REF signal during playback.
		With the EE output, the servo is synchronized
		with the input signal when there is no REF
		signal.

No./Item		Description
305	This sets the channel assignments for the
	controller’s analog audio preset when editing
EDIT RPLCE1	the digital audio of the VTR using a controller
	which does not have a digital audio edit
	preset control function.
	This selects the channel concerned when the
	VTR CH1 edit preset is set in compliance
	with the ON or OFF presetting for the analog
	audio signals designated by the controller.
	0000	N-DEF :
	Not set.
	0001	CH1 :
	Compliance with analog CH1 edit preset.
	0002	CH2 :
	Compliance with analog CH2 edit preset.
	0003	CH1+2 :
	Compliance with either analog CH1 or CH2
	edit preset.
306	The same type of setting as setup menu No.
	305. This selects the channel concerned
EDIT RPLCE2	when the CH2 edit preset is set in
	compliance with the ON or OFF presetting for
	the analog audio signals designated by the
	controller.
	0000	N-DEF :
	Not set.
	0001	CH1 :
	Compliance with analog CH1 edit preset.
	0002	CH2 :
	Compliance with analog CH2 edit preset.
	0003	CH1+2 :
	Compliance with either analog CH1 or CH2
	edit preset.
307	The same type of setting as setup menu No.
	305. This selects the channel concerned
EDIT RPLCE3	when the CH3 edit preset is set in
	compliance with the ON or OFF presetting for
	the analog audio signals designated by the
	controller.
	0000	N-DEF :
	Not set.
	0001	CH1 :
	Compliance with analog CH1 edit preset.
	0002	CH2 :
	Compliance with analog CH2 edit preset.
	0003	CH1+2 :
	Compliance with either analog CH1 or CH2
	edit preset.

The underlined items indicates the initial setting.

46