Panasonic AJ-SPX800E BATTERY SETTING1

	Items/				Adjustable	Remarks
Data Saved					Range
CARD NEAR					ON	Select whether or not to set the alarm to
END ALARM					OFF	beep for P2 CARD NEAR END ALARM.
–	C	U	F	–
CARD NEAR					3min	Set the remaining time to indicate the P2
END TIME					2min	CARD NEAR END TIME alarm.
–	C	U	F	–
CARD END					ON	Select whether or not to set the alarm to
ALARM					OFF	beep for P2 CARD END ALARM.
–	C	U	F	–
CARD REMAIN/					5min/„	Set the length of time for one segment („) of
„					3min/„	the P2 card’s remaining capacity indicator
						bars.
						5min: One segment represents 5 minutes.
						3min: One segment represents 3 minutes.
–	C	U	F	–

8-6-2					BATTERY SETTING1
	Items/					Adjustable		Remarks
Data Saved						Range
PRO14						_	Enable selection under BATTERY SELECT.
						•	_:	Enable selection.
							• :	Disable selection.
						AUTO	Select auto or manual to set the NEAR END
						MANUAL	voltage.
							AUTO: Set voltage automatically.
							MANUAL: Set voltage manually.
						11.0	When MANUAL is selected in the above
						:	menu, set the NEAR END voltage in 0.1 V
						13.7	steps.
						:
–	C	U	F	–		15.0
TRIM14						_	Enable selection under BATTERY SELECT.
						•	_:	Enable selection.
							• :	Disable selection.
						AUTO	Select auto or manual to set the NEAR END
						MANUAL	voltage.
							AUTO: Set voltage automatically.
							MANUAL: Set voltage manually.
						11.0	When MANUAL is selected in the menu
						:	above, set the NEAR END voltage in 0.1 V
						13.6	steps.
						:
									8
–	C	U	F	–		15.0
HYTRON50						_	Enable selection under BATTERY SELECT.
						•	_:	Enable selection.
							• :	Disable selection.
						AUTO	Select auto or manual to set the NEAR END
						MANUAL	voltage.
							AUTO: Set voltage automatically.
							MANUAL: Set voltage manually.
						11.0	When MANUAL is selected in the menu
						:	above, set the NEAR END voltage in 0.1 V
						13.1	steps.
						:
–	C	U	F	–		15.0
	HYTRON100					_	Enable selection under BATTERY SELECT.
						•	_:	Enable selection.
							• :	Disable selection.
						AUTO	Select auto or manual to set the NEAR END
						MANUAL	voltage.
							AUTO: Set voltage automatically.
							MANUAL: Set voltage manually.
						11.0	When MANUAL is selected in the menu
						:	above, set the NEAR END voltage in 0.1 V
						13.2	steps.
						:
–	C	U	F	–		15.0
	HYTRON120					_	Enable selection under BATTERY SELECT.
						•	_:	Enable selection.
							• :	Disable selection.
						AUTO	Select auto or manual to set the NEAR END
						MANUAL	voltage.
							AUTO: Set voltage automatically.
							MANUAL: Set voltage manually.
						11.0	When MANUAL is selected in the menu
						:	above, set the NEAR END voltage in 0.1 V
						13.1	steps.
						:
–	C	U	F	–		15.0

The ____ in the Adjustable Range column indicates the preset mode.

107