Panasonic AJ-SPX800E HIGH SETTING, ADDITIONAL DTL

8-3-6					HIGH SETTING
	Items/					Adjustable	Remarks
Data Saved						Range
„MASTER						–3dB	Select the master gain from –3, 0, 3, 6, 9,
GAIN						:	12, 15, 18, 21, 24, 27, or 30dB.
						18dB
						:
S	C	U	F	E		30dB
H.DTL LEVEL						00	Set H.DTL.
						:
						12
						:
S	C	U	F	E		63
V.DTL LEVEL						00	Set V.DTL LEVEL.
						:
						17
						:
S	C	U	F	E		31
DTL	CORING					00	Set DTL CORING.
						:
						08
						:
S	C	U	F	E		15
H.DTL FREQ.						00	Set a frequency (DTL width) at which H.DTL
						:	is added. The greater the value, the higher
						20	the frequency (the narrower the DTL).
						:
S	C	U	F	E		31
LEVEL						0	Set LEVEL DEPEND.
DEPEND.)						:	No DTL is added to the portion whose
						3	brightness is the setting value or less.
						:
							When the GAMMA MODE SEL item is set to
						5
							STD, each setting value represents
							brightness levels, as follows: 0 = about 0%,
							1 = about 4%, 2 = about 8%, 3 = about 12%,
							4 = about 16%, 5 = about 20%.
S	C	U	F	E
MASTER						0.35	Set MASTER GAMMA in 0.01 steps.
GAMMA						:
						0.55
						:
S	C	U	F	E		0.75
BLACK						–3	Set the gamma curb for dark spots.
STRETCH						:
						OFF
						:
S	C	U	F	E		+3
„	MATRIX					OFF	Select the colour correction table.
TABLE						A
						B
S	C	U	F	E
„	COLOR					ON	Set the colour correction to ON or OFF.
CORRECT						OFF
S	C	U	F	E

8-3-7					ADDITIONAL DTL
	Items/					Adjustable	Remarks
Data Saved						Range
KNEE APE LVL						OFF	Set KNEE APE LEVEL.
						1
						2
						:
S	C	U	F	E
						5
CHROMA DTL						OFF	Set the chroma detail.
						0	Detects the chroma edge and superimposes
						:	it on Y to enhance H.DTL. A greater value
						5	increases the correction.
S	C	U	F	E
DTL	GAIN(+)					–31	Adjust the detail level toward + (upwards).
						:
						+00
						:
S	C	U	F	E		+31
DTL	GAIN(–)					–31	Adjust the detail level toward the –
						:	(downwards).
						+00
						:
S	C	U	F	E		+31
DTL	CLIP					00	Adjust the detail signal clip towards the +
						:	direction.
						63
S	C	U	F	E
								8
DTL	SOURCE					(R+G)/2	Set the signal source for detail signal
						(G+B)/2	components.
						2G+R+B /4
						(3G+R)/4
						R
S	C	U	F	E		G
H.DTL LINE MIX						1H	Set the scan line to generate the H.DTL
						2H	signal.
S	C	U	F	E
„	CORNER DTL					ON	ON/OFF switching for CORNER DTL mode,
						OFF	which enhances the resolution around the
							screen perimeter.
S	C	U	F	E

<Note>

The items indicated by „ are the setting items for PAINT MENU SW(„) R/W in the <SD CARD R/W SELECT> screen. The items without „ are the setting items for PAINT MENU LEVEL R/W.

Please refer to [8-7-2 SD CARD R/W SELECT] for more information.

The ____ in the Adjustable Range column indicates the preset mode.

97