5-6 Attaching the Shoulder Strap

Shoulder Strap

Press to open the hook.

To detach the shoulder strap, first open the hooks, then detach the strap.

<Note>

Make sure that the shoulder strap is securely attached.

5-7 Attaching the Rain CoverWhen using the SHAN-RC700 Rain Cover

Tighten the cord

Secure with the

surface fastener

Secure with the surface fastener

5-8 Connecting the AJ-EC3E Extension Controller

Some functions can be remote-controlled when the AJ-EC3E extension control unit (optional) is connected to the camera. When the AJ-EC3E is connected, the camera automatically enters remote control mode after the power switches of both the camera and the AJ-EC3E are turned ON.

Controller Cable

AJ-

 

w

ECU Connector

AJ-EC3E

<Notes>

z Be sure to turn OFF both the camera and the AJ-EC3E power switches before connecting or disconnecting the controller cable.

z If ECU DATA SAVE is set to OFF, the camera-related setting values, which have been adjusted or set using the AJ-EC3E, will be cancelled when the camera power switch is turned OFF. Also, the setting values cannot be written to an SD card. However, the menu settings performed using the AJ-EC3E can be written to an SD card. Next time the AJ-EC3E is connected, the setting values will return to the AJ-EC3E settings.

ECU DATA SAVE can be selected from the <SW MODE> screen on the CAM OPERATION page.

z If ECU DATA SAVE is set to ON, the values adjusted or set using the AJ-EC3E are retained, even after the camera power switch is turned OFF.

z The USER switch on the camera does not function when the AJ-EC3E is connected.

z When controlling the shutter from the AJ-EC3E, the shutter speeds correspond to the speeds set by the menu on the camera, not the speeds written on the AJ-EC3E. The shutter speeds correspond as follows:

AJ-EC3E

Camera Shutter Speeds

Shutter Speed Indication

 

 

 

 

100 (60)

POSITION1

 

 

 

120

POSITION2

 

 

250

POSITION3

 

 

500

POSITION4

 

 

1000

POSITION5

 

 

2000

POSITION6

 

 

 

74