4To format the SD card, turn the JOG dial button to move the cursor to YES. Then, press the dial button.

When the SD card has been formatted, the following message appears:

To write set data on an SD card:

1Navigate the menu to the <SD CARD READ/WRITE> screen.

To select a file number:

2Turn the JOG dial button to move the cursor to the option [W. SELECT]. Then, press the dial button.

4

The card will not be formatted if the following message appears when the JOG dial button is pressed:

Error message

Remedy

 

 

CONFIG NG

Insert an SD card.

NO CARD

 

(No SD card inserted.)

 

 

 

CONFIG NG

The card may be defective.

ERROR

Replace the card.

(SD card cannot be formatted.)

 

 

 

CONFIG NG

Remove the card and cancel the

WRITE PROTECT

protect.

(SD card is write-protected.)

 

 

 

CONFIG NG

Example: The SD card is not

CANNOT ACCCESS

accessible because it is being

(SD card not accessible).

played back.

 

After the operation in process,

 

format the card.

 

 

5To exit the menu, press the MENU button.

The settings menu disappears and the status of the AJ- SPX800E is indicated at the top and bottom of the viewfinder screen.

<Note>

If an SD card is inserted or removed with the <SD CARD READ/WRITE> screen open, the data title cannot be edited.

Move the cursor to the option TITLE READ and press the JOG dial button.

Edit the data title.

3Turn the JOG dial button to select a desired number (1 - 8). Then, press the dial button.

To give the selected file a title:

4Turn the JOG dial button to move the cursor to the option [TITLE:].

5Press the JOG dial button. This moves the cursor to the entry area, putting the AJ-SPX800E in entry mode.

57