When using a BP-90 type battery pack.

1Remove the battery holder.

Battery holder

2Attaching the battery case to the camera-recorder. Connect the cable on the camera-recorder to the cable on the battery case (BP-90 type).

Using a screwdriver, secure the battery case (BP-90 type) to the camera-recorder.

Open the cover and lift the rubber cap so that the screw tightening hole is visible. Tighten the screws to secure the battery case to the camera-recorder. Be sure to fully tighten the screws.

<Notes>

z Do not use excess force when lifting the rubber caps forcibly.

z Take special care not to pinch the cable.

3Connect the battery pack plug to the socket inside the battery case, and insert the battery pack into the case.

Label

5

surface

<Note>

Make sure you turn OFF the camera-recorder power before connecting or disconnecting the plug.

4Setting the battery type.

Select the battery type listed under BATTERY SELECT. Select BATTERY SELECT from the <BATTERY/P2CARD> screen on the MAIN OPERATION page.

Please refer to [8-6-2 BATTERY SETTING1] for more information.

Connect

Battery Case

(For BP-90 type)

65