To title settings data for scene files:

10Press the JOG dial button to display the following message:

1 Navigate the menu to the <SCENE> screen.

2Turn the JOG dial button to move the cursor to the option [TITLEs 1 - 4] for the appropriate scene file.

3Press the JOG dial button to move the cursor to the title entry area, putting the AJ-SPX800E in entry mode.

4

11 Turn the JOG dial button to move the cursor to YES. Then, press the dial button.

This writes the title into the scene file area of the AJ- SPX800E internal memory.

12To exit the menu, press the MENU button.

4Turn the JOG dial button until a desired character appears. The characters that appear are switched in the following order:

Space:

†

Ð

 

Alphabetical characters:

A to Z

Ð

 

Numerals:

0 to 9

Ð

 

Symbols:

', >, <, /, -

5Press the JOG dial button to accept a desired character.

6Turn the JOG dial button to move the cursor to the next digit (clockwise), and repeat Steps 4 - 5 to set characters (up to eight characters).

7When the title is set, turn the JOG dial button to move the cursor to [:].

8Press the JOG dial button to return the cursor to the options TITLEs 1 - 4.

9Turn the JOG dial button to return the cursor to the option

WRITE.

4-10-5 Resetting Menu Option Settings to Defaults

The menu settings can be reset to their defaults.

To reset the settings to their defaults, select the menu option READ FACTORY DATA in the <INITIALIZE> screen, which is accessible from the FILE page.

All settings will be reset to their defaults.

<Note>

If an SD card is inserted or removed with the <SD CARD READ/ WRITE> screen open, the data title cannot be edited.

4-10-6 Lens File Data

The AJ-SPX800E is capable of correcting the lens white shading. This lens white shading correction may be stored as lens file data (maximum number of data sets is eight). Lens file data allows you to quickly perform a proper white shading adjustment, even when the lens is replaced.

For more information on reading/writing data, see [5-3 Mounting the lens and Performing the Flange Back and White Shading Adjustments].

63