Clip Meta Data

Displays more detailed data about the clip. Use the cursor buttons to move the pointer, and press the SET button to check the detailed content. The underlined items are automatically set during shooting. Other items can be input on your personal computer, etc.

GLOBAL CLIP ID:

Displays the global clip ID indicating the shooting conditions of the clip.

VIDEO: Displays [FRAME RATE] (clip frame rate), [PULL DOWN] (pulldown method), and [ASPECT RATIO] (aspect ratio).

AUDIO: Displays [SAMPLING RATE] (sampling frequency of recorded voice) and [BITS PER SAMPLE] (quantifying bit number of recorded voice).

USER CLIP NAME:

Displays the user-set clip name. The initial value is the global clip ID.

ACCESS: Displays [CREATOR] (name of the person who recorded the clip), [CREATION DATE] (date and time the clip was recorded), and [LAST UPDATE PERSON] (the last person who updated the clip).

DEVICE: Displays [MANUFACTURER] (name of the manufacturer of the recording equipment), [SERIAL NO.] (serial number of the recording equipment), and [MODEL NAME] (model name of the recording equipment).

SHOOT: Displays [SHOOTER] (name of the shooter), [START DATE] (shooting start date and time), [END DATE] (shooting end date and time), and

[LOCATION] ALTITUDE/LONGITUDE/LATITUDE/ SOURCE/PLACE NAME (shooting location’s latitude/longitude/altitude/source of the information/name).

SCENARIO:

Displays [PROGRAM NAME] (program name), [SCENE NO.] (scene number), and [TAKE NO.] (take number).

NEWS: Displays [REPORTER] (reporter name), [PURPOSE] (purpose of coverage), and [OBJECT] (coverage target).

MEMO: Displays [PERSON] (person who records the text memo added to the clip) and [TEXT] (content of the text memo). Two or more text memos can be recorded for a single clip, but this camera-recorder can only recognise the first text memo.

<Note>

This camera-recorder can only display printable ASCII characters.

6-13-2 P2 Card Status Display

From the menu bar, select PROPERTY  CARD STATUS. The following screen appears.

Write-protect Mark

The mark appears if the P2 card is write-protected.

P2 Card Status

The remaining memory capacity of the P2 card is indicated by a bar graph and percentage.

The following indications may appear, depending on the card status:

FORMAT ERROR:

An unformatted P2 card is inserted.

NOT SUPPORTED:

An unsupported card is inserted in the camera.

NO CARD:

P2 cards are not inserted.

P2 Card Remaining Capacity/Total Capacity

Displays the P2 card remaining capacity and total capacity in minutes. The total of the remaining memory capacity for each P2 card that is displayed may not match the actual total remaining memory capacity for the P2 cards because only the figure in minute is displayed.

Slots Total

Displays the total capacity of the 5 slots.

Please note that the remaining capacity of a write-protected P2 card is not included in the total remaining capacity.

84