4-9 Menu-driven Function Setup
Each function is set up using the menu system.
4-9-1 Setting the Switchover of USER SW GAIN
In addition to the standard L/M/H gain mode, the
To make use of this feature, you need to specify desired gains through the menu options S.GAIN and DS.GAIN.
For example, if the S.GAIN and DS.GAIN features are assigned to either the USER MAIN, USER1 or USER2 buttons, three different
The menu options can be found in the <USER SW GAIN> screen, which is accessible from the CAM OPERATION page.
1)To increase the gain without increasing noise: Combine the L/M/H gain and DS.GAIN features.
2)To increase the normal analog gain: (noise is increased)
Use the S.GAIN feature alone.
3)To achieve
Combine the S.GAIN and DS.GAIN features.(Gain increased by up to 68 dB.)
However, you should be extra careful when using this combination. With moving subjects, the greater the increase in DS.GAIN the more annoying the
In this case, limit the increase to +12dB (1/12).
Note that the DS.GAIN feature is disabled when the AJ- SPX800E is in progressive mode.
_E
_E
_E
_E
_E
_E
_E
Settings Options and Usage
S.GAIN: Analog
DS.GAIN:
4-9-2 Selecting Video Output Signals
You need to select the signals to be output from the VIDEO OUT and MON OUT connectors.
When the extension board
For more information, see
4-9-3 Selecting Function for the FRONT AUDIO LEVEL Control
The FRONT AUDIO LEVEL control can be assigned the function of adjusting the recording level.
To specify whether or not the FRONT AUDIO LEVEL control is effective on the channels set to accept input signals, use the menu options FRONT VR CH1 and FRONT VR CH2. These options can be found in the <MIC/AUDIO1> screen, which is accessible from the MAIN OPERATION page.
For more information, see
54