6-7-3 Deleting Voice Memos

6-9

Restoring Clips

1Perform Steps 1 to 4 in the [6-7-1 Playing Back Voice Memos] section to select the voice memo in the clip.

2Move the pointer over the clip you want to delete, and press the MENU BAR button. The pointer moves to the menu bar.

3From the menu bar, select OPERATION  DELETE.

YES and NO appear to confirm deletion. Use the cursor buttons and the SET button to select YES.

The voice memo is deleted.

6-8 Deleting Clips

1Press the THUMBNAIL button.

The thumbnail screen appears on the LCD monitor.

2Use the cursor buttons to move the pointer over the clip you want to delete.

Press the SET button to select the clip.

3Press the MENU BAR button and select OPERATION  DELETE from the menu bar.

4The following screen appears. Use the cursor buttons and the SET button to select YES.

5The clip is deleted. All selected clips (in blue-green frames) are deleted by this operation.

Restores clips that are defective as a result of sudden powering- down during recording, or removal of the P2 card being accessed.

<Note>

Only those clips with yellow corrupt clip markers can be restored. Delete the clips with red corrupt clip markers. If the clip cannot be deleted, format the P2 card.

During restoration of the clips, however, the defective-clip indicator may change from yellow to red, resulting in inability to restore the clips.

1Press the THUMBNAIL button.

The thumbnail screen appears on the LCD monitor.

2Use the cursor buttons to move the pointer over the clip you want to restore (defective clips are indicated by corrupt clip

marks).

6

Press the SET button to select the clip.

 

3Press the MENU BAR button, and select OPERATION  REPAIR CLIP from the menu bar.

4The confirmation window appears. Use the cursor buttons and the SET button to select YES.

81