Panasonic AJ-SPX800E manual 48

Information Item		Indication			Status
System information	SYSTEM ERROR-__		Something abnormal is happening to the internal computer communications or
and warnings			reference signal. No further recording or playback can be performed. __is
			replaced with an error code.For more information, see [7-3-2 Error Codes].
	TURN POWER OFF		P2 card has been removed while being accessed (recorded, played back, or
			formatted), and subsequent operation is disabled.
	REC WARNING		Something abnormal is happening to video and/or audio being recorded. This
			indication stays on until the next recording starts.
	BACKUP BATT EMPTY		Backup battery needs replacing.
	WIRELESS-RF		RF signal from the wireless receiver is degraded.
	EOM		P2 card has no free space.
	BOS		Playback position is at the start of all the clips.
	EOS		Playback position is at the end of all the clips.
	CANNOT REC		The P2 card is not recordable. Detailed information is provided on the FUNCTION
	CANNOT PLAY		screen of MODE CHECK		. See the relevant section of the MODE CHECK area.
			Clip cannot be played back perhaps because no P2 card is loaded, or the P2 card
			contains no clips.
	VOICE CANNOT REC		Voice memos cannot be recorded, possibly perhaps because the P2 card has no
			free space, or 100 voice memos are already recorded on one clip.
	VOICE REC		Voice memo being recorded.
	VOICE OFF		Recording of voice memo stopped.
	VOICE PLAY		Voice memo being played back.
	MARK ON/OFF		Shot mark been added or deleted. For information on shot marks, see [3-9 Shot
			Mark Function].
	UPDATING		Clip information is being updated. Playback operation disabled.
	USB DRIVE		AJ-SPX800E is in USB mode. When communication is disabled, the indication
			blinks. (To be supported in the near future.)
	THUMBNAIL OPEN		Thumbnail is being manipulated.
Voice memo	V		Voice memo being recorded. When the free space for voice memos is less than
indication			one minute, the indication blinks.
Audio input channel	- - - - „- - - - +		Selected channel together with its audio level.
and level meter	F		AUDIO IN switch is positioned at FRONT.
	W		AUDIO IN switch is positioned at WIRELESS.
	R		AUDIO IN switch is positioned at REAR.
Time code indication	TCG	12:59:59:20	TCG (time code generator value)
	TCR	12:59:59:20	TCR (time code reader value)
	(V)UBG	AB CD EF 00	UBG VUBG
	(V)UBR	12 34 56 78	UBR VUBR.
DV format indication	DV		DV format specified and playback being performed in the DV format.
Iris override	+ +		Correction phase of the iris override (when active)
indication	+		+ +	: On the open side by 1		+: On the open side by 0.5
	(No indication)		– –	: On the closed side by 1		–: On the closed side by 0.5
	–		No indication	: Standard status
	– –
Iris, F value	NC		Lens cable is not connected.
	0PEN		Lens iris is at maximum.
	F1.7 - F16		Lens iris value
	CLOSE		Lens iris closed.
			<Note>
			These indications are provided when the lens is capable of indicating the iris value.
			When the iris is being overridden, they blink.
Zoom indication	Z00 - Z99		Zoom degree is indicated. This indication is not provided for a lens that does not
			return the zoom position, even if the indication is set to ON.
PRE RECORDING	P-REC (blink)		Indicated while pre-recorded video and audio are being recorded on the P2 card.
indication
ID record indication	ID		The ID is set to be superimposed on the video from the camera.
Battery type	PRO14 - AC_ADPT		Battery type, selected through a menu option. When the AC adapter is connected,
			it is indicated as AC_ADPT.
Battery remaining	__._V		Battery remaining level in tenths of a volt
level/voltage	___%		Digital battery remaining level, as a percentage
	EMP		Digital battery empty.
	MAX		Digital battery fully charged.
Camera-recorder	REC		Recording status of the camera-recorder represented as characters when 1394 is
REC indication			connected. The indication stays illuminated during recording, or blinks when a
			warning is given.

48