6Turn the JOG dial button until a desired character appears. The characters that appear are switched in the following order:
Space: | |
Ð |
|
Alphabetical characters: | A to Z |
Ð |
|
Numerals: | 0 to 9 |
Ð |
|
Symbols: | ', >, <, /, - |
7Press the JOG dial button to accept a desired character.
8Turn the JOG dial button to move the cursor to the next digit (clockwise), and repeat Steps 6 - 7 to set characters (up to eight characters).
To write data on a selected file:
9When the title is set, turn the JOG dial button to move the cursor to [:].
10Press the JOG dial button to return the cursor to the option [TITLE:].
11 Turn the JOG dial button to move the cursor to the option [WRITE].
12Press the JOG dial button to display the following message:
The data will not be written if any of the following messages appears when the JOG dial button is pressed:
Error message | Remedy |
|
|
|
|
WRITE NG | Insert an SD card. |
NO CARD |
|
(No SD card inserted.) |
|
|
|
WRITE NG | The card has not been formatted |
FORMAT ERROR | using the |
(SD card not properly formatted.) | Replace the card. |
|
|
WRITE NG | The card may be defective. |
ERROR | Replace the card. |
(SD card not writable.) |
|
|
|
WRITE NG | Remove the card and disable the |
WRITE PROTECT | protect. |
(SD card |
|
|
|
WRITE NG | Example: The SD card is not |
CANNOT ACCCESS | accessible because it is being |
(SD card not accessible). | played back. |
| After the operation in process, |
| format the card. |
|
|
WRITENG | The card is not writable because it |
CARD FULL | has no free space. Delete |
(SD card has no free space.) | unwanted files or replace the card |
| with a new one. |
|
|
13Turn the JOG dial button to move the cursor to YES. Then, press the dial button.
When the data has been written, the following message appears:
14To exit the menu, press the MENU button.
The settings menu disappears and the status of the AJ- SPX800E is indicated at the top and bottom of the viewfinder screen.
58