6-5 Switching the Thumbnail Display

The display can be switched so that only those clips matching the specified conditions are displayed in the thumbnail screen.

1Press the THUMBNAIL button.

The thumbnail screen appears on the LCD monitor.

2Press the MENU BAR button. The pointer moves to the menu bar.

6-6 Shot Mark

A shot mark can be added to a clip thumbnail to distinguish this clip from the others.

1Press the THUMBNAIL button.

The thumbnail screen appears on the LCD monitor.

2Use the cursor buttons to move the pointer over the clip to which you want to attach a shot mark.

3Press the Shot Mark button.

MENU BAR Button

3Move the pointer over THUMBNAIL and press the SET button to select it. A sub-menu appears. Switch the thumbnail display by selecting one of the following items:

ALL CLIPS:

Display all clips.

SELECTED CLIPS:

Display randomly selected clips.

MARKED CLIPS:

Display clips with shot marks attached.

VOICE MEMO CLIPS:

Display clips with voice memo data attached.

SLOT CLIPS:

Display clips recorded in the P2 card inserted in the specified slot.

When this item is selected, SLOT1 to SLOT5 are displayed as a sub-menu. Select the desired slot to display the clips.

SET UP:

Please refer to [6-12 Setting the Thumbnail Display Mode] for information about this item.

EXIT:

Close the sub-menu.

6

Shot Mark Button

4A shot mark will be attached to the clip thumbnail under the pointer.

To delete a shot mark, reposition the pointer over the clip and press the Shot Mark button.

<Notes>

z A shot mark can be attached during recording. Please refer to [3-9 Shot Mark Function] for more information.

z When adding a shot mark to (or deleting the shot mark from) a clip recorded across multiple P2 cards, do this with all these P2 cards inserted into P2 card slots.

79