5-4 Preparing for Audio Input

Take the following steps to prepare the camera for connecting audio input devices.

5-4-1 When Using the Front Microphone

The AJ-MC700P microphone kit (optional) includes a microphone that can be mounted on the camera.

1Open the microphone holder.

5-4-2 When Using a Wireless Receiver

Using an External Wireless Receiver

Mount a wireless receiver when using a wireless system.

1Mount the wireless receiver on the camera attachment.

2Align the grooves in the camera attachment with the pins on the unit (e.g., the battery case), and mount the wireless receiver.

Audio Output Jack

Wireless Receiver

2Mount the microphone and tighten the clamping screw.

Clamping Screw

3Connect the microphone cable to the MIC IN jack on the camera.

MIC IN Jack

4Set the AUDIO IN switch to [FRONT] depending on the audio channel to be recorded.

AUDIO IN

Switch

Camera Attachment

XLR Cable

AUDIO IN Jack

AUDIO IN Switch

3Connect the wireless receiver to the AUDIO IN jack with the XLR cable.

4Set the AUDIO IN switch to [REAR] for the channel to which the XLR cable is connected.

5Set the LINE/MIC/+48V selector switch on the rear panel to [MIC].

To remove the wireless receiver, raise the lever on the bottom of the camera attachment.

<Note>

Please refer to the wireless receiver’s instruction manual for such information as operation of the wireless receiver.

72