Panasonic AV-HS400AN manual Wipe area

WIPE PATTERN / FUNCTION

1. Functions in each area

1-3. Wipe area

8Wipe pattern selector buttons

These 12 buttons are used to select the corresponding wipe patterns while the indicator of the [BKGD PATT] button (9) or [KEY PATT] button (9) is lighted.

They are used to select the corresponding setting menus when the indicator of the FUNC button (;) is lighted.

The indicator of the selected button lights in amber.

 

			PAGE
1	2	3	WIPE	SQ
TIME	WIPE	COLOR	SL	3D
4	5	6	ON
KEY	CHR KEY	FREEZE	BKGD PATT
7	8	9
DSK	PinP	IN/OUT	KEY PATT



9BKGD, KEY pattern selector buttons

10

11 12



These buttons are used to switch the wipe pattern selection. MEMORY XPT SYSTEM FUNC

The wipe pattern of a background transition is selected when the indicator of the [BKGD PATT] button is lighted after it was pressed.

The wipe pattern of a key transition is selected when the indicator of the [KEY PATT] button is lighted after it was pressed.

Each time the [BKGD PATT] button or [KEY PATT] button is pressed, the pattern page is changed in the sequence of WIPE, SQ (squeeze), SL (slide) and 3D (3 dimensions), and the pattern page indicator LED (:) is also switched.

:Pattern page indicator LEDs

These LEDs indicate the pages selected by the background transitions while the indicator of the [BKGD PATT] button is lighted.

They indicate the pages selected by the key transitions while the indicator of the [KEY PATT] button is lighted. The WIPE, SQ (squeeze), SL (slide) or 3D (3 dimensions) LED lights.

;FUNC button

When this button is pressed, its indicator lights in amber. When a wipe pattern selector button (8) is pressed while the indicator of the [FUNC] button is lighted, the setting menu indicated below the button is displayed on the LCD screen.

[TIME]:	The auto transition time settings are performed.	 See 3-1-5.
[WIPE]:	The modify, border or soft effect decoration settings are performed for wipe.	 See 3-2.
[COLOR]:	The color background settings are performed.	 See 3-7.
[KEY]:	The key settings are performed.	 See 3-3.
[CHR KEY]: The chroma key settings are performed.		 See 3-3-6.
[FREEZE]: The freeze status is displayed and freeze settings are performed.		 See 3-8.
[DSK]:	DSK settings are performed.	 See 3-5.
[PinP]:	PinP settings are performed.	 See 3-4.
[IN/OUT]:	The input/output signals are set.	 See 4.
[MEMORY]: The preset memory, frame memory or SD memory card settings are performed.
[XPT]:	 See 3-10, 3-11 and 3-12.
	The crosspoint assignment is displayed and set.	 See 5-2.
[SYSTEM]:	The system settings are performed.	 See 5.

<Freeze status indicator LED

When this LED is lighted, it means that one of the input signals is in the freeze status.

The freeze status of the input signals assigned to the crosspoint buttons can be checked on the menu.

See 3-8.

Since the freeze status is established while this indicator is lighted, the input image handled inside the unit will remain unchanged even when a different image is input.

10