Panasonic AV-HS400AN manual Frame memories, Transferring images from the AUX bus, Basic operations

3. Basic operations

3-11. Frame memories

Still images can be stored in the unit’s two internal frame memories for use.

The still images are transferred to the frame memories through the AUX bus and an SD memory card. Conversely, the images in the frame memories can be transferred to an SD memory card.

Images in the frame memories can be used as bus images by assigning FMEM1 and FMEM2 using the crosspoint assignment function.

Since the images stored in the frame memories are stored in the unit’s RAM area, the image data is erased once the power is turned off.

Transfer them again after the power has been turned back on.

3-11-1. Transferring images from the AUX bus

1Press the [FUNC] button to light its indicator, and press the [MEMORY] button to display the MEMORY menu.

2Turn [F1] to display the FMEM sub menu.

<Menu display>

FMEM	Signal	Store	Review	Exec↓
2/4	AUX	FMEM1	Off
		FMEM2	On

3Turn [F3] to select the frame memory in which to store the images using the Store item.

4Turn [F4] to select on or off for the review display setting using the Review item.

On: After the image is imported, the FMEM1 or FMEM2 image is displayed (for 2 seconds) in the AUX bus. Even during review display, the next image can be imported.

Off: No review display.

5Press the [F5] switch (Exec) to import the still images to the frame memory. The still images can also be imported using the user buttons.

“StrFM1” and “StrFM2” have been allocated to the user buttons ( See 5-3-1.), and when one of these buttons is pressed, it will light for an instant, and the still image is then imported.

Review display

Importing to FMEM1

	PGM			AUX
						1	2
							USER
	PGM			AUX
INPUT1		INPUT2	INPUT3		INPUT4
			FMEM1		FMEM2
INPUT5		INPUT6	FMEM1		FMEM2

PGM AUX

	PGM		AUX
INPUT1	INPUT2	INPUT3	INPUT4
			FMEM2
INPUT5	INPUT6	FMEM1	FMEM2

Imported still image

55