Manuals / Panasonic / Computer Equipment / Switch

Panasonic AV-HS400AN Input/output signal settings, Setting the frame synchronizer, Menu display

Models: AV-HS400AN

1 122

Download 122 pages 59.6 Kb

Page 61

4. Input/output signal settings

4. Input/output signal settings

4-1. Setting the SDI input signals and analog input signals

The user can set the SDI input signals and analog input signals.

IN5 to IN8 can be set only when one of the following optional boards has been connected: SDI input board

Analog input board

Analog composite input board

4-1-1. Setting the frame synchronizer

The frame synchronizer can be set to On or Off for each input.

The DVI input (option) frame synchronizer is permanently On. It cannot be set from On to Off or vice versa.

1Press the [FUNC] button to light its indicator, and press the [IN/OUT] button to display the IN/OUT menu.

2 Turn [F1] to display the Input sub menu.

3Turn [F2], select the input signals using the Signal item, turn [F3], and select On or Off for the frame synchronizer using the FS item.

If the output signal phase is set to 0H, Off cannot be selected as the FS item setting.

<Menu display>

Input		Signal		FS			Mode↓		AnaGain
1/15		In1			On		]Normal		0
1/15		In1			On		]Normal		0

IN1-8

Off

D by D −30-+30

UC Auto

AVDL function is active while the frame synchronizer function is set to Off.

The AVDL function automatically adjusts the input image signal phase to the horizontal synchronization reference signal phase.

For details, refer to “4-6. Adjusting the output signal phase”.

61

Image 61

Panasonic AV-HS400AN Input/output signal settings, Setting the SDI input signals and analog input signals, Menu display

Contents

Multi-format Live Switcher Operating Instructionsindicates safety information Safety precautions THIS APPARATUS MUST BE EARTHED For CANADASafety precautions IMPORTANT SAFETY INSTRUCTIONSindicates safety information For USA-California OnlyFeatures ContentsPrecautions for use Description4. Input/output signal settings ContentsDescription FeaturesCompact design, wide variety of input/output signals Multiple formats supported Power off before connecting or disconnecting cables Precautions for use Maintenance  Precaution to be observed during production1-1. Control panel 1. Functions in each area Power indicator POWER 2Alarm indicator ALARM1. Functions in each area 1-2. Crosspoint area3 PGM/A bus crosspoint buttons PGM/A 1 to 4 PST/B bus crosspoint buttons PST/B 1 toPattern page indicator LEDs 1-3. Wipe areaFreeze status indicator LED 1. Functions in each area1. Functions in each area 1-4. User button area= User buttons USER 1, USER USER1. Functions in each area 1-5. Transition area   BKGD buttonWhen the R indicator is lighted When the R indicator is offWhen the N/R indicator is lighted 1. Functions in each areaAdjust 2/9 1-6. LCD menu area1. Functions in each area Clip 0.01. Functions in each area 1-7. Positioner areaN Positioner X/Y O Rotary encoder ZQ SD memory card access LED 1-8. SD memory card area1. Functions in each area PSD memory card slotR SDI signal input connectors SDI INPUTS 1 to 1-9. Rear panel connections areaU SDI signal output connectors SDI OUTPUTS PGM, 1 X Reference input connector/BB output connector REFZ RS-422 interface connector RS-422 D-sub 9-pin, female, inch screw Y LAN connector LAN RJ-45 10BASE-TTally output connector TALLY D-sub 15-pin, male, inch screw \ GPI input connector GPI 3.5 mm diameter stereo mini jack2. System 2-1. ConfigurationAV-HS400AN Table of optional boards2-2. Connections Connections when implementing gen-lock frame synchronizer OFFPower cord AC 100 V to 120 V, 50/60 Hz Multi-Format Live SwitcherExample where the optional board is used Connections when not implementing gen-lock frame synchronizer ONLive Switcher 2. System3-1. Background transition 3. Basic operations3-1-1. Selecting the bus 3-1-2. Selecting the bus mode3-1-3. Selecting the transition mode 3-1-4. Manual transition using the fader lever3-1-5. Auto transition 3-1-6. Cut transition3-2-1. Selecting the wipe pattern 3-2. WipeHow to select the wipe patterns 3. Basic operations3-2-3. Wipe decorations border, soft effect 3-2-2. Selecting the wipe directionWhen the R indicator is off When the R indicator is lightedX-Pos, Y-Pos setting range 3-2-4. Setting the wipe start position3. Basic operations Menu display Setting the lighting effect 3-2-5. Modifying wipe Setting the trimming 3. Basic operationsKEY PinP DSK 3-3. KeyHS400A HS400A3. Basic operations 3-3-1. Selecting the key typeMenu display Lum luminance key/self key Selecting the key fill and key source signals 3-3-2. Selecting the key materialSelecting the key fill signal Selecting the key source signal3. Basic operations 3-3-3. Key transitionsPattern examples 3-3-4. Key preview 3-3-5. Adjusting the luminance key and linear keyDescription of setting Setting range3. Basic operations 3-3-6. Adjusting the chroma key Executing auto sampling Menu displayTips for chroma key adjustments  Adjusting the chroma key3. Basic operations Menu display3. Basic operations  Making other adjustmentsMenu display  Setting the key edge 3-3-7. Key decorations Setting the edge color To call the preset color3. Basic operations 3-3-8. Masking the key signals+50 TOP +25 0 BOTTOM 50 -25 0 +25 +50 LEFT RIGHT PinP combinations using the flying key 3-3-9. Flying key3. Basic operations Menu display3-4-1. Selecting the PinP material 3-4. PinP picture in picture3-4-2. PinP transitions 3-4-3. PinP preview Adjusting the PinP position and size 3-4-4. PinP adjustments Adjusting the density 3. Basic operations Setting the border color 3-4-5. PinP decorationsTo call the preset color 3. Basic operations3. Basic operations 3-4-6. Trimming settingsTOP +40 LEFT3-5-1. Selecting the DSK type 3-5. DSK downstream key3. Basic operations Menu display Selecting the DSK fill signal and DSK source signal 3-5-2. Selecting the DSK materialSelecting the DSK fill signal Selecting the DSK source signal3-5-3. DSK transitions 3-5-5. DSK adjustments3-5-4. DSK preview 3. Basic operations Setting the edge 3-5-6. DSK decorations Setting the edge color To call the preset color3. Basic operations 3-5-7. Masking the DSK signals+50 TOP +25 0 BOTTOM 50 -25 0 +25 +50 LEFT RIGHT3. Basic operations 3-6. FTB fade to black3-7-1. Setting the color background 3-7. Internal color signals Adjusting the colors  Calling the preset colors3-8-2. Setting freeze 3-8. Freezing the input signals3-8-1. Displaying the freeze status 3. Basic operations Selecting the output signals using the crosspoint buttons 3-9. Switching the AUX output3. Basic operations Table of stored preset memory 3-10. Preset memory3. Basic operations Initial value factory default Description of setting3. Basic operations Chroma key CLEAR This is used to clear contents in the preset memory  STORE This is used to store the panel settings in the preset memory3. Basic operations 2 Turn F1 to display the PSMEM sub menu3-11-1. Transferring images from the AUX bus 3-11. Frame memories3. Basic operations Menu displaySD memory card handling precautions 3-12. SD memory cards3. Basic operations Frame memory data still image data3. Basic operations 3-12-1. Initializing the SD memory cardsMenu display 3. Basic operations 3-12-2. Saving data on SD memory cardsMenu display 3. Basic operations 3-12-3. Loading data from SD memory cardsMenu display Characters which can be used for filenames3-12-5. Displaying the SD memory card information 3-12-4. Deleting files on SD memory cards3. Basic operations Menu display4-1. Setting the SDI input signals and analog input signals 4. Input/output signal settings4-1-1. Setting the frame synchronizer Menu display4. Input/output signal settings 4-1-2. Setting the input modeList of input modes supported 4-1-4. Setting the analog composite input signals 4-1-3. Setting the analog input gain4. Input/output signal settings Menu display4. Input/output signal settings 4-2. Setting the up-converter optionMenu display Input image4-3-1. Setting the DVI input signals 4-3. Setting the DVI input signals option4. Input/output signal settings Automatic adjustment of the black levelDVI input scaling size table 4. Input/output signal settingsDVI format Mode4. Input/output signal settings 4-3-2. Adjusting the DVI input signalsMenu display 4-4-1. Types of output signals 4-4. Setting the output signals4. Input/output signal settings 4. Input/output signal settings 4-4-2. Assigning the output signalsMenu display Normal4. Input/output signal settings 4-5. Setting the sync signalsBBSetup Menu display4. Input/output signal settings 4-6. Adjusting the output signal phaseOutput video signal phase adjustment Phase4. Input/output signal settings Phase adjustment setup0H Output 1F delay for REF and in-phase output Output Phase Variable Range4. Input/output signal settings Phases and delay amounts of input/output signals during HD format usesignals Output signals4. Input/output signal settings Phase relationship between input signals and output signalsfor 1080/59.94i format Example4-7-1. Setting the screen layout 4-7. Setting the multi view display4. Input/output signal settings Display modes 10-division modeThey cannot be set when the 4-division mode 4Split is selected. The default settings are PGM for Upper-L and PVW for Upper-R 4. Input/output signal settingsMenu display 1 to4-7-3. Setting the tally displays 4-7-2. Setting the split frame and characters4. Input/output signal settings Menu display4. Input/output signal settings 4-7-4. Changing the material names Preset type setting procedure  User type setting procedure4. Input/output signal settings 4-8. Setting the on-screen display OSD“” appears to the left of the selected menu This indicates the wipe pattern for the background transition4. Input/output signal settings 4-9. Setting the DVI output signals optionDVIOut Signal Mode↓ Size↓ Scale↓ 12/15 OUT3 Dig Auto Fit-V Menu display4. Input/output signal settings 4-10. Setting the ancillary data Setting the V ancillary data  Setting the embedded audio data4. Input/output signal settings 4-11. Setting the down-converterMenu display SQ squeeze5-1. Selecting the video format 5. System settings Setting the 169 squeeze mode Menu display5-2-1. Assigning signals to the crosspoints 5-2. Setting the crosspoints5. System settings Assigning signals to the crosspoints5. System settings 5-2-2. Setting the crosspoint switchingMenu display XPTSwch Timing 3/3 Any Field1 Field25-3-2. Setting the FTB button 5-3-1. Setting the user buttons5-3. Button assignments 5. System settings5. System settings 5-4. Setting the date and time Setting the date  Setting the time5. System settings 5-5. Network settingsSetting the IP address Setting the subnet mask5-6-1. Setting the LCD backlight 5-6. Other settings5-6-2. Setting editor enable 5-6-3. Setting the protocol5. System settings 5-6-4. Setting the GPIMenu display AUTO5. System settings 5-7. Camera controlFunctions that can be controlled from the unit 5. System settings Example of connections when the unit and a controller are connectedConnection specifications AV-HS400ANConnection specifications 5. System settingsSIGNAL  Connections for AW-HE100N, AW-PH405N or AW-PH360NAW-IF400G Switch settings 5. System settingsConnection specifications  Connections for AW-PH400P Camera control settings 5. System settings Control of lens focusing is possible when the  Control using the positioner is possible whenMiddle Control is exercised at the medium speed 5. System settings5-8. Status displays 5-8-1. Alarm status displays5. System settings Menu display5. System settings 5-8-2. Displaying the version information and option informationMenu display Control, Panel, Input, M/E5. System settings 5-9. InitializationMenu display Menu display6. External interfaces 6-1. RS-422 connectorSignal name Description of signalInitial setting 6-2. GPI connector6. External interfaces Control functions that can be assignedIN1 to 8, ALARM Pins 1 to 9 must satisfy the following conditionsDielectric strength Max. DC 24 Current7. Image transmission functions SpecificationsConnections 7. Image transmission functions How to install the softwareSetting the IP address Operation7. Image transmission functions StartupTransmitting images to the unit 7. Image transmission functionsTransmitting images from the unit 7. Image transmission functionsParameter 8. Setting menu tableParameter ParameterParameter 8. Setting menu tableParameter ParameterParameter 8. Setting menu tableParameter ParameterParameter 8. Setting menu tableParameter ParameterParameter 8. Setting menu tableParameter ParameterParameter 8. Setting menu tableParameter ParameterParameter 8. Setting menu tableParameter ParameterUnit inch mm 9. AppearanceSpecifications 10. Specifications and standard accessoriesSignal formats Signal processingSDI outputs 10. Specifications and standard accessoriesAnalog composite input optionOptional boards sold separately Standard accessories10. Specifications and standard accessories Power supplyWord Appendix glossaryExplanation AB Bus systemWord Appendix glossaryExplanation Frame MemoryPreset Memory Preset BusAppendix glossary WordPANASONIC BROADCAST & TELEVISION SYSTEMS COMPANY