Key preview | Panasonic AV-HS400AN specification

3. Basic operations

5Execute the transition.

Press the [AUTO] button to execute the transition automatically for the transition time which has been set. Alternatively, execute the transition manually by operating the fader lever.

When the KEYAuto function has been assigned to the [FTB] button, the transition will be executed automatically for the transition time which has been set when the [FTB] key is pressed no matter which transition mode has been selected.

During key in, the indicator of the [FTB] button blinks in red, and it lights in red when the transition is completed.

If the [FTB] button is pressed with the picture completely keyed in, the Key image transition (key out) is executed.

During key out, the indicator of the [FTB] button lights in red, and it goes off when the transition is completed.

If the [FTB] button is pressed during the transition, the transition direction is reversed.

3-3-4. Key preview

Key preview images can be output to the preview output, and the keys can be adjusted and checked.

On the KEY menu, turn [F1] to display the KEY sub menu.

Turn [F5] to set the preview mode using the PVW item.

On: An image with key effects added is output to the preview output.

Off: An image with no key effects added is output to the preview output.

Auto: The preview image of the next transition is output to the preview output.

3-3-5. Adjusting the luminance key and linear key

These steps are taken to adjust the luminance key and linear key definition.

1Press the [FUNC] button to light its indicator, and press the [KEY] button to display the KEY menu.

2 Turn [F1] to display the Adjust sub menu.

<Menu display>

Adjust	Clip			Gain		Density		Invert
2/9		0.0		100.0		100.0		Off
2/9		0.0		100.0		100.0		Off

3Turn [F2], [F3] and [F4] to adjust the key definition.

4Turn [F5] to set key invert.

When On is selected, the key signals to be generated internally are inverted.

	Operation	Parameter	Description of setting	Setting range
	F2	Clip	Reference level for generating	0.0 to 108.0
	F2	Clip	key signals	0.0 to 108.0
			key signals
	F3	Gain	Key amplitude	0.0 to 200.0
	F4	Density	Key density	0.0 to 100.0
	F5	Invert	Key signal inversion	On, Off

32

Image 32

Panasonic AV-HS400AN manual Key preview, Adjusting the luminance key and linear key

Contents

Operating Instructions Safety precautions FCC Note Important Safety Instructions For USA-California Only Contents Input/output signal settings System settings Features Description Precautions for use  Power indicator Power 2Alarm indicator AlarmSystem/Alarm 8/16 Functions in each area Crosspoint area Wipe area User button area = User buttons User 1, User Transition area Auto button CUT buttonFTB button PinP button List of menu delegation functions LCD menu areaRotary encoders F1 to F5 Positioner area Positioner X/YRotary encoder Z Positioner Rotary encoder Valid menu SD memory card access LED SD memory card areaPSD memory card slot    Concerning the recommended SD memory cards SDI signal input connectors SDI Inputs 1 to SDI signal output connectors SDI Outputs PGM, 1Reference input connector/BB output connector REF External synchronization mode Tally output connector Tally D-sub 15-pin, male, inch screw \ GPI input connector GPI 3.5 mm diameter stereo mini jackGround connector AC power input socket in AC 100 V to 120 Configuration Board Model number Function Where connectedSystem Table of optional boards Connections Example where the optional board is used Selecting the bus mode Basic operationsBackground transition Selecting the bus Selecting the transition mode Manual transition using the fader leverAuto transition Cut transition How to select the wipe patterns WipeSelecting the wipe pattern Table of wipe patterns  Setting the border and soft effect  Setting the border colorTo call the preset color Selecting the wipe direction Setting the wipe start position Pos, Y-Pos setting range Modifying wipe  Setting the lighting effect Setting the trimming Key Key, PinP and DSK prioritiesHow key composition works Background Key source Selecting the key type Lum luminance key/self keyLinear linear key/EXT key Chroma chroma key/self key  Selecting the key fill and key source signals Selecting the key fill signalSelecting the key source signal  Setting the fill matte color Key transitions Pattern examples Key preview Adjusting the luminance key and linear keyOperation Parameter Description of setting Setting range Adjusting the chroma key  Executing auto samplingPositioner Rotary encoder Z Item operations  Adjusting the chroma keyTips for chroma key adjustments  Making other adjustments Key decorations  Setting the key edge Setting the edge color Masking the key signals Turn F2 to F5 to set the area to be masked  PinP combinations using the flying key Flying key PinP picture in picture Selecting the PinP materialPinP transitions PinP preview PinP adjustments  Adjusting the PinP position and size Select the dot by dot mode  Adjusting the density PinP decorations Trimming settings DSK downstream key Selecting the DSK type  Selecting the DSK fill signal and DSK source signal Selecting the DSK fill signalSelecting the DSK source signal Selecting the DSK material DSK preview DSK adjustmentsDSK transitions  Setting the edge DSK decorations Masking the DSK signals FTB fade to black Internal color signals Setting the color background Adjusting the colors  Calling the preset colors Displaying the freeze status Freezing the input signalsSetting freeze Switching the AUX output  Selecting the output signals using the crosspoint buttons Preset memory Table of stored preset memoryTransition area Border Bkgd Wipe Color Description of setting Initial value factory default KeyChroma key  Clear This is used to clear contents in the preset memory Frame memories Transferring images from the AUX bus SD memory cards Initializing the SD memory cards Saving data on SD memory cards Loading data from SD memory cards Characters which can be used for filenames Deleting files on SD memory cards Displaying the SD memory card information Setting the frame synchronizer Input/output signal settingsSetting the SDI input signals and analog input signals Setting the input mode System Mode InputList of input modes supported 576/50i 1080/59.94i Setting the analog input gain Setting the analog composite input signals Setting the up-converter option Input image Setting the DVI input signals option Setting the DVI input signalsAutomatic adjustment of the black level Automatic adjustment of the white level 1280  720  Fit-V1024 768 Fit-H Adjusting the DVI input signals Connector Signal type Output default Assignment Setting the output signalsTypes of output signals DC down-converter Assigning the output signalsNormal Setting the sync signals Phase Video format Adjustment range Adjusting the output signal phaseOutput video signal phase adjustment Phase adjustment setup System standard 1H Output +1H Shortest Output +0.5H Signals Video effects Output signals Down-converterWhen the 1080/59.94i format is used Frame synchronizer Phase relationship between input signals and output signals For 1080/59.94i format Example Display modes Division mode Setting the multi view displaySetting the screen layout Upper-L, Upper-R These can be set to PGM, PVW, AUX or KeyOut LUM 0%, 25%, 50%, 75%, 100% Setting the split frame and charactersSetting the tally displays Changing the material names  Preset type setting procedure User type setting procedure Setting the on-screen display OSD  Examples of OSD displays Setting the DVI output signals option  Setting the embedded audio data Setting the ancillary data Setting the V ancillary data Setting the down-converter SQ squeezeEC edge crop LB letter box Selecting the video format System settings Setting the 169 squeeze mode Setting the crosspoints Assigning signals to the crosspointsAssigning signals to the crosspoints Button Signal Abbreviation Description Setting the crosspoint switching Button Signal Description Setting the user buttons Setting the FTB buttonSetting method Button assignments  Setting the time Setting the date and time Setting the date Network settings Setting the IP addressSetting the subnet mask Setting the gateway Other settings Setting the LCD backlightSetting editor enable Setting the protocol Setting the GPI Camera control Functions that can be controlled from the unit Connection specifications AW-RP655N RS-422 RS-232C ConverterPin No RS-422RS-232C Converter  Connections for AW-HE100N, AW-PH405N or AW-PH360N AW-HE100N, AW-PH405N, AW-PH360N Pin No AW-PH400P AW-IF400G Switch settings Connections for AW-PH400P  Camera control settings  For controlling the lens zooming System settings Alarm status displays Status displays Displaying the version information and option information Control, Panel, Input, M/EIN-SL1, 2 option input slots 1 OUT-SL1, 2 option output slots 1 Initialization RS-422 connector External interfaces GPI connector Initial settingControl functions that can be assigned Function assigned Description of control Remarks Pin No Signal name Input/output Description of signal Example of tally connections Specifications Image transmission functionsConnections LAN straight cable How to install the software Setting the IP address OperationStartup Exit Transmitting images to the unit Transmitting images from the unit Setting menu table Parameter Adjust Adjust1Adjust2 Hue-Rad Sat-Rad Soft Cancel Border Width Soft Mode Type FillPosition Trim Manual Signal Mode ↓ AnaGain Signal Output Mode ↓Sync ↓ BBSetup GenLock System Phase Signal Mode ↓ Size ↓ Scale ↓ Signal Scale ↓ MovDet ↓ Sharp ↓Signal Chroma Ped Hue Signal Scale ↓ Delay ↓ Sharp ↓ Mode ↓ 169SQ Signal PosCont Speed Power ↓Alarm Power Fan Date Year Month Date Set ↓Time Hour Minute Second Set ↓ Appearance Unit inch mm Specifications and standard accessories Video delay time SDI outputsAnalog composite Input option Standard accessories Optional boards sold separately Appendix glossary Frame Memory FreezeFTB Fade to Black Genlock Preset Bus Preset MemoryPreview Program Bus Headquarters Government officeBroadcast Parts Information & Ordering Panasonic Canada Inc