Switching the AUX output | Panasonic AV-HS400AN instruction

3. Basic operations

3-9. Switching the AUX output

The user can switch the AUX output signals.

The signals of any of the AUX bus crosspoint button 1 to 10, PGM (program) signals, PVW (preview) signals or CLN (clean) signals can be selected for output to the AUX bus.

[PGM]: The PGM signals are output to the AUX bus.

[PVW]: The PVW signals are output to the AUX bus.

[CLN]: The clean signals (images whose DSK signals have been removed from the PGM signals) are output to the AUX bus.

Selecting the output signals using the crosspoint buttons

Press the [AUX] button among the AUX bus selector buttons to light its indicator, and press one of the AUX bus crosspoint buttons 1 to 10, CLN, PVW or PGM button to select the AUX output signals.

The indicators of the [AUX] button and the selected button light in amber.

AMB:FILL / GRN:SOURCE

KEY	DSK	PinP	AUX	CLN	PVW	PGM
	AUX BUS DELEGATION				AUX SOURCE
	AUX BUS DELEGATION				AUX SOURCE

AUX

Page 51

Image 51

Panasonic AV-HS400AN manual Switching the AUX output,  Selecting the output signals using the crosspoint buttons

Contents

Operating Instructions FCC Note Safety precautions For USA-California Only Important Safety Instructions Contents System settings Input/output signal settings Description Features Precautions for use Functions in each area  Power indicator Power2Alarm indicator Alarm System/Alarm 8/16 Crosspoint area Wipe area = User buttons User 1, User User button area Transition area PinP button Auto buttonCUT button FTB button LCD menu area Rotary encoders F1 to F5List of menu delegation functions Positioner Rotary encoder Valid menu Positioner areaPositioner X/Y Rotary encoder Z  Concerning the recommended SD memory cards SD memory card access LEDSD memory card area PSD memory card slot   External synchronization mode SDI signal input connectors SDI Inputs 1 toSDI signal output connectors SDI Outputs PGM, 1 Reference input connector/BB output connector REF AC power input socket in AC 100 V to 120 Tally output connector Tally D-sub 15-pin, male, inch screw\ GPI input connector GPI 3.5 mm diameter stereo mini jack Ground connector Table of optional boards ConfigurationBoard Model number Function Where connected System Connections Example where the optional board is used Selecting the bus Selecting the bus modeBasic operations Background transition Cut transition Selecting the transition modeManual transition using the fader lever Auto transition Table of wipe patterns How to select the wipe patternsWipe Selecting the wipe pattern Selecting the wipe direction  Setting the border and soft effect Setting the border color To call the preset color Pos, Y-Pos setting range Setting the wipe start position  Setting the lighting effect  Setting the trimmingModifying wipe Key source KeyKey, PinP and DSK priorities How key composition works Background Chroma chroma key/self key Selecting the key typeLum luminance key/self key Linear linear key/EXT key  Setting the fill matte color  Selecting the key fill and key source signalsSelecting the key fill signal Selecting the key source signal Pattern examples Key transitions Adjusting the luminance key and linear key Operation Parameter Description of setting Setting rangeKey preview Rotary encoder Z Adjusting the chroma key Executing auto sampling Positioner  Adjusting the chroma key Tips for chroma key adjustmentsItem operations  Making other adjustments  Setting the key edge  Setting the edge colorKey decorations Turn F2 to F5 to set the area to be masked Masking the key signals Flying key  PinP combinations using the flying key PinP preview PinP picture in pictureSelecting the PinP material PinP transitions  Adjusting the density PinP adjustments Adjusting the PinP position and size  Select the dot by dot mode PinP decorations Trimming settings Selecting the DSK type DSK downstream key Selecting the DSK material  Selecting the DSK fill signal and DSK source signalSelecting the DSK fill signal Selecting the DSK source signal DSK adjustments DSK transitionsDSK preview DSK decorations  Setting the edge Masking the DSK signals FTB fade to black  Calling the preset colors Internal color signalsSetting the color background  Adjusting the colors Freezing the input signals Setting freezeDisplaying the freeze status  Selecting the output signals using the crosspoint buttons Switching the AUX output Border Bkgd Wipe Preset memoryTable of stored preset memory Transition area Description of setting Initial value factory default Key Chroma keyColor  Clear This is used to clear contents in the preset memory Transferring images from the AUX bus Frame memories SD memory cards Initializing the SD memory cards Saving data on SD memory cards Characters which can be used for filenames Loading data from SD memory cards Displaying the SD memory card information Deleting files on SD memory cards Input/output signal settings Setting the SDI input signals and analog input signalsSetting the frame synchronizer 576/50i 1080/59.94i Setting the input modeSystem Mode Input List of input modes supported Setting the analog composite input signals Setting the analog input gain Input image Setting the up-converter option Automatic adjustment of the white level Setting the DVI input signals optionSetting the DVI input signals Automatic adjustment of the black level Fit-H 1280  720 Fit-V 1024 768 Adjusting the DVI input signals Setting the output signals Types of output signalsConnector Signal type Output default Assignment Assigning the output signals NormalDC down-converter Setting the sync signals Adjusting the output signal phase Output video signal phase adjustmentPhase Video format Adjustment range System standard 1H Output +1H Shortest Output +0.5H Phase adjustment setup Frame synchronizer SignalsVideo effects Output signals Down-converter When the 1080/59.94i format is used For 1080/59.94i format Example Phase relationship between input signals and output signals Setting the multi view display Setting the screen layoutDisplay modes Division mode These can be set to PGM, PVW, AUX or KeyOut Upper-L, Upper-R Setting the split frame and characters Setting the tally displaysLUM 0%, 25%, 50%, 75%, 100%  Preset type setting procedure  User type setting procedureChanging the material names  Examples of OSD displays Setting the on-screen display OSD Setting the DVI output signals option Setting the ancillary data  Setting the V ancillary data Setting the embedded audio data LB letter box Setting the down-converterSQ squeeze EC edge crop System settings  Setting the 169 squeeze modeSelecting the video format Button Signal Abbreviation Description Setting the crosspointsAssigning signals to the crosspoints Assigning signals to the crosspoints Button Signal Description Setting the crosspoint switching Button assignments Setting the user buttonsSetting the FTB button Setting method Setting the date and time  Setting the date Setting the time Setting the gateway Network settingsSetting the IP address Setting the subnet mask Setting the protocol Other settingsSetting the LCD backlight Setting editor enable Setting the GPI Functions that can be controlled from the unit Camera control RS-422RS-232C Converter Connection specificationsAW-RP655N RS-422 RS-232C Converter Pin No AW-HE100N, AW-PH405N, AW-PH360N Pin No  Connections for AW-HE100N, AW-PH405N or AW-PH360N AW-IF400G Switch settings  Connections for AW-PH400PAW-PH400P  For controlling the lens zooming  Camera control settings System settings Status displays Alarm status displays OUT-SL1, 2 option output slots 1 Displaying the version information and option informationControl, Panel, Input, M/E IN-SL1, 2 option input slots 1 Initialization External interfaces RS-422 connector Function assigned Description of control Remarks GPI connectorInitial setting Control functions that can be assigned Example of tally connections Pin No Signal name Input/output Description of signal LAN straight cable SpecificationsImage transmission functions Connections How to install the software Exit Setting the IP addressOperation Startup Transmitting images to the unit Transmitting images from the unit Parameter Setting menu table Hue-Rad Sat-Rad Soft Cancel AdjustAdjust1 Adjust2 Trim Manual Border Width Soft ModeType Fill Position System Phase Signal Mode ↓ AnaGainSignal Output Mode ↓ Sync ↓ BBSetup GenLock Signal Scale ↓ Delay ↓ Sharp ↓ Signal Mode ↓ Size ↓ Scale ↓Signal Scale ↓ MovDet ↓ Sharp ↓ Signal Chroma Ped Hue Power Fan Mode ↓ 169SQSignal PosCont Speed Power ↓ Alarm Hour Minute Second Set ↓ DateYear Month Date Set ↓ Time Unit inch mm Appearance Specifications and standard accessories Input option Video delay timeSDI outputs Analog composite Optional boards sold separately Standard accessories Appendix glossary Genlock Frame MemoryFreeze FTB Fade to Black Program Bus Preset BusPreset Memory Preview Panasonic Canada Inc HeadquartersGovernment office Broadcast Parts Information & Ordering