Panasonic AV-HS400AN manual Input/output signal settings, Menu display, 1 to, Upper-L, Upper-R

4. Input/output signal settings

1Press the [FUNC] button to light its indicator, and press the [IN/OUT] button to display the IN/OUT menu.

2 Turn [F1] to display the Multi1 sub menu.

<Menu display>

Multi1	Split		Pos	Signal
6/15	10Split	1		IN1
	4Split	1-8	IN1-8
	8Split			FMEM1
				FMEM2
				CBGD

Upper-L Upper-R

PGM

PVW

AUX KeyOut

3Turn [F2] to select the display mode using the Split item.

4Turn [F4] to select the position (1 to 8, Upper-L and Upper-R in the figures) using the Pos item, and turn [F5] to set the name of the signal using the Signal item.

Different settings are stored for 10-division mode, 4-division mode and 8-division mode.

1 to 8:

This can be set to IN1 to IN8, FMEM1, FMEM2 or CBGD.

IN1 to IN8 is the default setting for Pos1 to Pos8 in any of the modes.

Upper-L, Upper-R:

These can be set to PGM, PVW, AUX or KeyOut.

They cannot be set when the 4-division mode (4Split) is selected. The default settings are PGM for Upper-L and PVW for Upper-R.

The names of the signals selected as the AUX output signals are displayed in [ ] as with [CLN], [PVW] and [PGM].

Some signal names are abbreviated as shown below, and displayed. FMEM1  [FM1], FMEM2  [FM2], CBGD  [CBG], CBAR  [BAR]

76