Panasonic AV-HS400AN manual Setting the wipe start position, Basic operations, Menu display

3. Basic operations

3-2-4. Setting the wipe start position

Any start position can be set for wipe pattern WIPE and SQ #5.

The start position has one set of values for a background pattern and another set for a key pattern.

1Press the [FUNC] button to light its indicator, and press the [WIPE] button to display the WIPE menu.

2 Turn [F1] to display the WIPEPos sub menu or the SQPos sub menu.

<Menu display>

WIPEPos	Select	X-Pos	Y-Pos	CopyTo↓
3/5	BKGD	0.00	0.00	KEY

KEY −100.00 −100.00

+100.00 +100.00

3Turn [F2] to select the pattern (background or key) to be set using the Select item.

4Either operate the positioners or turn [F3] and [F4] to set the wipe start position using the X-Pos item and Y-Pos item.

These settings can be established only when WIPE or SQ #5 has been selected as the background pattern or key pattern.

5Either operate the fader lever or press the [AUTO] button to check the wipe operation.

(When, for instance, –50 has been set for X-Pos and –50 for Y-Pos, the following screen (or key) appears from the bottom left and wipe is performed while the screen (or key) moves to the screen center.)

<X-Pos, Y-Pos setting range>

Inside screen area

Outside screen area

6To copy the start position settings, press [F5].

The copy destination appears under the CopyTo item. (It will not change even if [F5] is turned.)

26