Panasonic AV-HS400AN manual Setting menu table, Parameter

8. Setting menu table

Menu	Sub menu		Parameter 1	Parameter 2	Parameter 3	Parameter 4
	Turn F1 to select.		Turn F2 to select.	Turn F3 to select.	Turn F4 to select.	Turn F5 to select.
IN/OUT	DVIOut	Parameter	Signal	Mode ↓	Size ↓	Scale ↓
	12/15	Setting range	OUT3, OUT5	]Dig, Ana	]Auto, XGA,	]Fit-V, Fit-H, Full,
					WXGA, SXGA,	5:4 (“5:4” can be
					WSXGA+, UXGA,	selected when
					WUXGA	SXGA has been
						selected as the
						Size item setting.)
		Default value	—	Dig	Auto	Fit-V
	UpConvt	Parameter	Signal	Scale ↓	MovDet ↓	Sharp ↓
	13/15	Setting range	IN5 to 8	]SQ, EC, LB	]1 to 5	]1 to 5
		Default value	—	SQ	3	3
	CmpsitIn	Parameter	Signal	Chroma	Ped	Hue
	14/15	Setting range	IN5 to 8	−8 to +7	−100 to +100	−30 to +30
						(Enabled when the
						system format is
						set to 1080/59.94i,
						720/59.94p and
						480/59.94i.)
		Default value	—	0	0	0
	DownConv	Parameter	Signal	Scale ↓	Delay ↓	Sharp ↓
	15/15	Setting range	OUT3 to 6	]SQ, EC, LB	]90H (75H), 1F	]1 to 5
		Default value	—	SQ	90H	1
MEMORY	PSMEM	Parameter	Mode	NO.Sel	XPT	Exec ↓
	1/4	Setting range	Store, Recall,	n1 to 10	Disable, Enable
			Clear
		Default value	—	—	—	—
	FMEM	Parameter	Signal	Store	Review	Exec ↓
	2/4	Setting range	AUX	FMEM1, FMEM2	On, Off
		Default value	—	—	Off	—
	SDCard	Parameter	Mode ↓	Select	SaveFile	Exec ↓
	3/4	Setting range	]Load, Save, Init,	FMEM1, FMEM2,	HS070531100000
			Delete, No Card	System
		Default value	—	—	—
	CardInfo	Parameter	Images	FreeSpace		GetInf ↓
	4/4	Setting range		MB/ MB
		Default value
XPT	XPTStats	Display only	SIG:B 1 2 3 4 5 6 7 8 G
	1/3		XPT:1 2 3 4 5 6 7 8 9 10
	XPTAsign	Parameter	XPT	Signal
	2/3	Setting range	1 to 10	IN1 to 8, Black,
				CBGD, CBAR,
				FMEM1, FMEM2,
				None
		Default value	—	—
	XPTSwch	Parameter	Timing
	3/3	Setting range	Any, Field1, Field2
		Default value	Any

112