Setting the crosspoints | Panasonic AV-HS400AN guide

5. System settings

5-2. Setting the crosspoints

5-2-1. Assigning signals to the crosspoints

External video input signals and internally generated signals can be assigned to crosspoint buttons 1 to 10.

Displaying the assignment statuses

1Press the [FUNC] button to light its indicator, and press the [XPT] button to display the XPT menu.

2Turn [F1] to display the XPTStats sub menu.

The status of the assignment is displayed. The names of the assigned signals are abbreviated on the display.

<Menu display>

XPTStats		SIG:B	1	2	3	4	5	6	7	8	G
1/3		XPT:1	2	3	4	5	6	7	8	9	10

When one of the crosspoint buttons 1 to 10 is held down for a long time, the name of the signal assigned is displayed on the LCD while the button is held down.

Example: When crosspoint button 1 is pressed (when the INPUT1 signal has been assigned to this button)

XPTStats SIG:IN1

XTP:1

Assigning signals to the crosspoints

1Press the [FUNC] button to light its indicator, and press the [XPT] button to display the XPT menu.

2Turn [F1] to display the XPTAsign sub menu.

3Turn [F2], select the crosspoint button using the XPT item, turn [F3] and select the input signal using the Signal item.

Changing the current assignment of the signals selected by the crosspoint buttons will cause the positions of the lighted crosspoint buttons to change to correspond with the assignment change. The images output at this time will remain unchanged.

<Menu display>


XPTAsign		XPT			Signal
2/3		1			IN1
2/3		1			IN1

		1-10			IN1-8
					Black
					CBGD
					CBAR
					FMEM1
					FMEM2
					None

The table below lists the materials which can be assigned.

Button	Signal	Abbreviation		Description
XP1 to 10	INPUT1 to 8	IN1 to 8	1 to 8	SDI, analog component,
				analog composite and DVI
	BLACK	Black	B	Internally generated signal, black
	COLOR BACKGROUND	CBGD	G	Internally generated signal, color
				background
	COLOR BAR	CBAR	C	Internally generated signal, color bar
	FRAME MEMORY1, 2	FMEM1, 2	F1, F2	Frame memory image
	None	None	—	No assignment

The image will not be changed by pressing any button to which “None” is assigned.

84

Image 84

Panasonic AV-HS400AN Setting the crosspoints, Assigning signals to the crosspoints, Displaying the assignment statuses

Contents

Operating Instructions Safety precautions FCC Note Important Safety Instructions For USA-California Only Contents Input/output signal settings System settings Features Description Precautions for use  Power indicator Power 2Alarm indicator AlarmSystem/Alarm 8/16 Functions in each area Crosspoint area Wipe area User button area = User buttons User 1, User Transition area Auto button CUT buttonFTB button PinP button LCD menu area Rotary encoders F1 to F5List of menu delegation functions Positioner area Positioner X/YRotary encoder Z Positioner Rotary encoder Valid menu SD memory card access LED SD memory card areaPSD memory card slot    Concerning the recommended SD memory cards SDI signal input connectors SDI Inputs 1 to SDI signal output connectors SDI Outputs PGM, 1Reference input connector/BB output connector REF External synchronization mode Tally output connector Tally D-sub 15-pin, male, inch screw \ GPI input connector GPI 3.5 mm diameter stereo mini jackGround connector AC power input socket in AC 100 V to 120 Configuration Board Model number Function Where connectedSystem Table of optional boards Connections Example where the optional board is used Selecting the bus mode Basic operationsBackground transition Selecting the bus Selecting the transition mode Manual transition using the fader leverAuto transition Cut transition How to select the wipe patterns WipeSelecting the wipe pattern Table of wipe patterns  Setting the border and soft effect  Setting the border colorTo call the preset color Selecting the wipe direction Setting the wipe start position Pos, Y-Pos setting range  Setting the lighting effect  Setting the trimmingModifying wipe Key Key, PinP and DSK prioritiesHow key composition works Background Key source Selecting the key type Lum luminance key/self keyLinear linear key/EXT key Chroma chroma key/self key  Selecting the key fill and key source signals Selecting the key fill signalSelecting the key source signal  Setting the fill matte color Key transitions Pattern examples Adjusting the luminance key and linear key Operation Parameter Description of setting Setting rangeKey preview Adjusting the chroma key  Executing auto samplingPositioner Rotary encoder Z  Adjusting the chroma key Tips for chroma key adjustmentsItem operations  Making other adjustments  Setting the key edge  Setting the edge colorKey decorations Masking the key signals Turn F2 to F5 to set the area to be masked  PinP combinations using the flying key Flying key PinP picture in picture Selecting the PinP materialPinP transitions PinP preview PinP adjustments  Adjusting the PinP position and size Select the dot by dot mode  Adjusting the density PinP decorations Trimming settings DSK downstream key Selecting the DSK type  Selecting the DSK fill signal and DSK source signal Selecting the DSK fill signalSelecting the DSK source signal Selecting the DSK material DSK adjustments DSK transitionsDSK preview  Setting the edge DSK decorations Masking the DSK signals FTB fade to black Internal color signals Setting the color background Adjusting the colors  Calling the preset colors Freezing the input signals Setting freezeDisplaying the freeze status Switching the AUX output  Selecting the output signals using the crosspoint buttons Preset memory Table of stored preset memoryTransition area Border Bkgd Wipe Description of setting Initial value factory default Key Chroma keyColor  Clear This is used to clear contents in the preset memory Frame memories Transferring images from the AUX bus SD memory cards Initializing the SD memory cards Saving data on SD memory cards Loading data from SD memory cards Characters which can be used for filenames Deleting files on SD memory cards Displaying the SD memory card information Input/output signal settings Setting the SDI input signals and analog input signalsSetting the frame synchronizer Setting the input mode System Mode InputList of input modes supported 576/50i 1080/59.94i Setting the analog input gain Setting the analog composite input signals Setting the up-converter option Input image Setting the DVI input signals option Setting the DVI input signalsAutomatic adjustment of the black level Automatic adjustment of the white level 1280  720  Fit-V1024 768 Fit-H Adjusting the DVI input signals Setting the output signals Types of output signalsConnector Signal type Output default Assignment Assigning the output signals NormalDC down-converter Setting the sync signals Adjusting the output signal phase Output video signal phase adjustmentPhase Video format Adjustment range Phase adjustment setup System standard 1H Output +1H Shortest Output +0.5H Signals Video effects Output signals Down-converterWhen the 1080/59.94i format is used Frame synchronizer Phase relationship between input signals and output signals For 1080/59.94i format Example Setting the multi view display Setting the screen layoutDisplay modes Division mode Upper-L, Upper-R These can be set to PGM, PVW, AUX or KeyOut Setting the split frame and characters Setting the tally displaysLUM 0%, 25%, 50%, 75%, 100%  Preset type setting procedure  User type setting procedureChanging the material names Setting the on-screen display OSD  Examples of OSD displays Setting the DVI output signals option Setting the ancillary data  Setting the V ancillary data Setting the embedded audio data Setting the down-converter SQ squeezeEC edge crop LB letter box System settings  Setting the 169 squeeze modeSelecting the video format Setting the crosspoints Assigning signals to the crosspointsAssigning signals to the crosspoints Button Signal Abbreviation Description Setting the crosspoint switching Button Signal Description Setting the user buttons Setting the FTB buttonSetting method Button assignments Setting the date and time  Setting the date Setting the time Network settings Setting the IP addressSetting the subnet mask Setting the gateway Other settings Setting the LCD backlightSetting editor enable Setting the protocol Setting the GPI Camera control Functions that can be controlled from the unit Connection specifications AW-RP655N RS-422 RS-232C ConverterPin No RS-422RS-232C Converter  Connections for AW-HE100N, AW-PH405N or AW-PH360N AW-HE100N, AW-PH405N, AW-PH360N Pin No AW-IF400G Switch settings  Connections for AW-PH400PAW-PH400P  Camera control settings  For controlling the lens zooming System settings Alarm status displays Status displays Displaying the version information and option information Control, Panel, Input, M/EIN-SL1, 2 option input slots 1 OUT-SL1, 2 option output slots 1 Initialization RS-422 connector External interfaces GPI connector Initial settingControl functions that can be assigned Function assigned Description of control Remarks Pin No Signal name Input/output Description of signal Example of tally connections Specifications Image transmission functionsConnections LAN straight cable How to install the software Setting the IP address OperationStartup Exit Transmitting images to the unit Transmitting images from the unit Setting menu table Parameter Adjust Adjust1Adjust2 Hue-Rad Sat-Rad Soft Cancel Border Width Soft Mode Type FillPosition Trim Manual Signal Mode ↓ AnaGain Signal Output Mode ↓Sync ↓ BBSetup GenLock System Phase Signal Mode ↓ Size ↓ Scale ↓ Signal Scale ↓ MovDet ↓ Sharp ↓Signal Chroma Ped Hue Signal Scale ↓ Delay ↓ Sharp ↓ Mode ↓ 169SQ Signal PosCont Speed Power ↓Alarm Power Fan Date Year Month Date Set ↓Time Hour Minute Second Set ↓ Appearance Unit inch mm Specifications and standard accessories Video delay time SDI outputsAnalog composite Input option Standard accessories Optional boards sold separately Appendix glossary Frame Memory FreezeFTB Fade to Black Genlock Preset Bus Preset MemoryPreview Program Bus Headquarters Government officeBroadcast Parts Information & Ordering Panasonic Canada Inc