Panasonic AV-HS400AN manual Setting menu table, Parameter

8. Setting menu table

Menu	Sub menu		Parameter 1	Parameter 2	Parameter 3	Parameter 4
	Turn F1 to select.		Turn F2 to select.	Turn F3 to select.	Turn F4 to select.	Turn F5 to select.
KEY	KEY	Parameter	Type	LumKey	Fill	PVW
	1/9	Setting range	Lum, Linear,	ChrmOn, ChrmOff	Bus, Matte	Auto, On, Off
			Chroma, Full
		Default value	Linear	ChrmOff	Bus	Auto
	Adjust	Parameter	Clip	Gain	Density	Invert
	2/9	Setting range	0.0 to 108.0	0.0 to 200.0	0.0 to 100.0	On, Off
		Default value	0.0	100.0	100.0	Off
	FillMatt	Parameter	Hue	Sat	Lum	Load ↓
	3/9	Setting range	0.0 to 359.9	0.0 to 100.0	0.0 to 108.0	White, Yellow,
						Cyan, Green,
						Magenta, Red,
						Blue, Black
		Default value	0.0	0.0	100.0	White
	Edge	Parameter	Type	Width	Direc
	4/9	Setting range	Off, Border, Drop,	0 to 4	0, 45, 90, 135,
			Shadow, Outline		180, 225, 270, 315
		Default value	Off	2	0
	EdgeCol	Parameter	Hue	Sat	Lum	Load ↓
	5/9	Setting range	0.0 to 359.9	0.0 to 100.0	0.0 to 108.0	White, Yellow,
						Cyan, Green,
						Magenta, Red,
						Blue, Black
		Default value	0.0	0.0	0.0	Black
	Mask	Parameter	Mask	Invert
	6/9	Setting range	Manual, Off, 4:3	On, Off
		Default value	Off	Off
	MaskAdj	Parameter	Left	Top	Bottom	Right
	7/9	Setting range	−50.00 to +50.00	−50.00 to +50.00	−50.00 to +50.00	−50.00 to +50.00
		Default value	−25.00	+25.00	−25.00	+25.00
	Trans	Parameter	OutPatt
	8/9	Setting range	Nor, Rev
		Default value	Nor
	FlyKEY	Parameter	X-Pos	Y-Pos	Size
	9/9	Setting range	−100.00 to 100.00	−100.00 to 100.00	0.0 to 400.0
		Default value	0.00	0.00	100.0
CHR KEY	Auto	Parameter	Marker	Aspect		Sample ↓
	1/3	Setting range	On, Off	−50.00 to +50.00		Start
		Default value	Off	0.0
	Adjust1	Parameter	Hue	Sat	Lum	Y-Infl
	2/3	Setting range	0.0 to 359.9	0.0 to 100.0	0.0 to 108.0	0.0 to 100.0
		Default value	354.0	100.0	7.0	0.0
	Adjust2	Parameter	Hue-Rad	Sat-Rad	Soft	Cancel
	3/3	Setting range	0.0 to 100.0	0.0 to 100.0	0.0 to 100.0	0.0 to 100.0
		Default value	100.0	50.0	0.0	0.0
FREEZE	Status	Display only	FRZ:] ] ] ] ] ] ] ] ] ]
	1/2		XPT:1 2 3 4 5 6 7 8 9 10
	Freeze	Parameter	Signal	Select		Freeze ↓
	2/2	Setting range	IN1 to 8	Frame, Field		Toggling between
						On and Off
		Default value	—	Frame		Off

109