Panasonic AV-HS400AN manual Selecting the wipe direction, Wipe decorations border, soft effect

3. Basic operations

3-2-2. Selecting the wipe direction

Operate the wipe direction selector buttons to select the wipe direction for the background transition.

(The key transitions are set by the menu. The direction which is set here will not be reflected.  See 3-3-3.)

When the [R] indicator is off:

Wiping proceeds in the normal direction.

When the [R] indicator is lighted:

Wiping proceeds in the reverse direction.

When the [N/R] indicator is lighted:

The normal direction is replaced with the reverse direction (or vice versa) when the transition is completed.

(The lighted and extinguished statuses of the [R] button are also switched in line with the direction of the wiping.)

!

"

!

"

.

!"

" !

2

"!

!"

.2

!"

!"

3-2-3. Wipe decorations (border, soft effect)

A border effect or soft effect can be added to the wiping of background transitions (but not for key transitions).

Setting the border and soft effect

1 Press the [FUNC] button to light its indicator, and press the [WIPE] button to display the WIPE menu.

2Turn [F1] to display the Border sub menu.

3Turn [F2] to set On (or Off) for the border using the Border item.

4Turn [F3] to set the width of the border using the Width item.

5Turn [F4] to set the amount of soft effect using the Soft item. The soft effect is OFF if 0.0 is set.

<Menu display>

Border	Border		Width		Soft
1/5	Off	5.0		0.0
	On	0.1	0.0
			100.0		100.0

When “On” has been selected as the Border item setting, the ratio of the soft effect to the border width is indicated as the amount of soft effect.

When only the soft effect is to be added to wipe, select “Off” as the Border item setting.

Setting the border color

1 On the WIPE menu, turn [F1] to display the BodrCol sub menu.

2Turn [F2], [F3] and [F4] to adjust the Hue, Sat and Lum of the border color.

To call the preset color

Turn [F5] to select the preset color using the Load item, and press the [F5] switch.

The Hue, Sat and Lum values are changed to the preset color values.

To save the values that were set before calling the preset color, refer to “3-10. Preset memory”.

<Menu display>

BodrCol		Hue		Sat		Lum	Load↓
2/5	0.0		0.0		100.0		White
		0.0	0.0	0.0	Yellow
							Cyan
		359.9		100.0		108.0	Green
							Magenta
							Red
							Blue
							Black

25