Panasonic AW-RC400E, AW-RL400G, AW-RP400E Zoom switch Plug D-SUB 15-pin for tally/INCOM system

Pan/Tilt Head Controller AW-RP400

Introduction

≥This pan/tilt head controller enables up to five AW-PH400 indoor pan/tilt heads to be controlled.

≥By connecting the AW-CB400 remote operation panel or WV-CB700A remote control box to the controller, the convertible cameras mounted on the pan/tilt heads can be controlled at the same time.

≥By installing an additional controller, two of the five units in the pan/tilt head system can be controlled at the same time.

≥Up to ten tracing memories can be accommodated.

≥Up to 50 preset memories can be set.

≥The connection distance between the controller and pan/tilt head system can be extended up to a maximum of 500 meters.

NOTE

≥The AW-RP400 cannot be used to control the model AW-PH300, AW-PH300A, AW-PH350, AW-PH500 or AW-PH600 pan/tilt heads.

≥Before using the controller, the movement range (limiters) of the pan/tilt head system must be set without fail.

≥When the AW-PH400 controller is to be discarded at the end of its service life, ask a specialized contractor to dispose of it properly in order to protect the environment.

Accessories
Zoom switch	1
Plug (D-SUB 15-pin) for tally/INCOM system	1 set
Rack-mounting adaptors	2
Mounting screws (M4!8 mm)	4

19 (E)