Panasonic AW-RC400E MONITOR1, 2 connectors BAC adaptor storage space, Video in connectors 1 to

Cable Compensator AW-RC400

Parts and their function

;MONITOR1, 2 connectors BAC adaptor storage space

The video signals of the cameras selected by the AW-RP400 pan/tilt head controller or the AW-CB400 remote operation panel which is connected to the AW-RP400 are output from these connectors.

The output signals are cable-compensated signals of the same type as the input signals. For instance, if a channel to which composite signals have been input is selected, these composite signals will be cable-compensated and output.

The AC adaptor can be stored here when the ambient temperature in the location where the cable compensator has been installed is under 30°C. Remove the two screws, and remove the storage space cover. Pull out the AW-PS301 AC adaptor, and stow it away while ensuring that the cable is not subjected to stress. Trouble will occur in the AC adaptor if the ambient temperature exceeds 30°C, in which case it should not be stored in the space.

<Y/VIDEO IN connectors [1 to 5]

The analogue video signals are input to these connectors. They are terminated internally by a 75-ohm resistance.

Either Y (component signals or Y of the Y/C signals with sync) or VIDEO (composite) signals are supplied.

=Pr/C IN connectors [1 to 5]

The analogue video signals are input to these connectors. They are terminated internally by a 75-ohm resistance.

Either Pr (R-Y among the component signals) or C (C of the Y/C signals) signals are supplied.

>Pb IN connectors [1 to 5]

The analogue video signals are input to these connectors. They are terminated internally by a 75-ohm resistance.

The Pb (B-Y among the component signals) signals are supplied.

?Y/VIDEO OUT connectors [1 to 5]

The analogue video signals are output from these connectors. Cable-compensated Y or VIDEO (composite) signals that are in accordance with the input signals are output. Y signals are output if component Y signals have been input to the Y/VIDEO IN connectors

[1 to 5], and composite signals are output if composite signals have been input.

@Pr/C OUT connectors [1 to 5]

The analogue video signals are output from these connectors. Cable-compensated Pr or C signals that are in accordance with the input signals are output.

Pr signals are output if Pr signals have been input to the Pr/C IN connectors [1 to 5], and C signals are output if C signals have been input.

APb OUT connectors [1 to 5]

The analogue video signals are output from these connectors. Cable-compensated Pb signals are output if Pb signals have been input to the Pb IN connectors

[1 to 5].

37 (E)