Panasonic AW-RL400G, AW-RP400E, AW-RC400E manual 35 E

Cable Compensator AW-RC400

Introduction

≥The AW-RC400 is capable of providing cable compensation for analogue composite, analogue Y/C or analogue component signals in five channels up to 500 meters (when the 5C-2V connecting cable or its equivalent is used).

≥It features a 5us advance function for the sync signals in order to provide easy support for a system (another cable compensator is required) in which the coaxial cable connected between this AW-RC400 cable compensator and the camera is longer than 500 meters.

NOTE

≥Input either sync signals to the sync signal input connector on the AW-RC400 cable compensator or input video signals to one of the video channels (input composite signals or Y signals with sync to video input connector 1). If neither of these signals is input, the monitor selection will not be controlled.

≥The AW-RC400 provides cable compensation for the three Y, Pr and Pb signal channels by means of a single control. This means that the Y, Pr and Pb signals cannot be adjusted separately. In the same way, the Y and C signals cannot be adjusted separately.

≥The AW-RC400 is a cable compensator and, as such, it does not come with signal conversion functions (for converting component signals into composite signals, for instance).

≥When the cable compensator is to be discarded at the end of its service life, ask a specialized contractor to dispose of it properly in order to protect the environment.

Accessories
Rack-mounting adaptors	2
Mounting screws (M4!8 mm)	4

35 (E)